Products
$3.88 / EA
manufacturer discounts
learn about discounts
- $3.48 for $1,300.00+
- $3.29 for $2,000.00+
- $3.16 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Bolt Close Conduit/Pipe Clamp with Shot-Fire Bracket, 0.67"�0.84" OD, 1/2" EMT, 1/2" Rigid/Pipe
Bolt Close Conduit/Pipe Clamp with Shot-Fire Bracket, 0.67"�0.84" OD, 1/2" EMT, 1/2" Rigid/Pipe
150
- Retained bolt and built-in nut means there are less parts to handle or drop
- Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers
- Complete with shot-fire bracket and pre-assembled drive pin from DEWALT�
- Quickly and easily attaches to concrete, steel or composite metal decking
- Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
- ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT�
- Retained bolt and built-in nut means there are less parts to handle or drop
- Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers
- Complete with shot-fire bracket and pre-assembled drive pin from DEWALT�
- Quickly and easily attaches to concrete, steel or composite metal decking
- Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
- ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT�
- UPC
- 782856866428
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Steel
- Type:
- Deck
- Finish:
- Electrogalvanizing
- Height (Imperial) <Nom>:
- 1 3/4 in
- Material:
- Steel
- Outer Diameter (Imperial) <Max>:
- 0.840 in
- Outer Diameter (Imperial) <Min>:
- 0.670 in
- Static Load (lb):
- 100 lb
- Sub Brand:
- CADDY
- Type:
- Deck
- Width (Imperial) <Nom>:
- 3 3/8 in
Bolt Close Conduit/Pipe Clamp with Shot-Fire Bracket, 0.67"�0.84" OD, 1/2" EMT, 1/2" Rigid/Pipe
manufacturer discounts
learn about discounts
- $3.48 for $1,300.00+
- $3.29 for $2,000.00+
- $3.16 for $3,000.00+
$3.88 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$2.83 / EA
manufacturer discounts
learn about discounts
- $2.54 for $1,300.00+
- $2.40 for $2,000.00+
- $2.30 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
MATA Conduit to T-Grid Clip, 1" EMT
MATA Conduit to T-Grid Clip, 1" EMT
150
- Provides a method of securing conduit above acoustical tee bar
- No tools required for installation
- Eliminates need for offset bending conduit
- Provides a method of securing conduit above acoustical tee bar
- No tools required for installation
- Eliminates need for offset bending conduit
- UPC
- 782856602163
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Spring Steel
- Type:
- Adjustable Box Components and Conduit Supports
- Finish:
- nVent CADDY Armour
- Material:
- Spring Steel
- Standard:
- None
- Sub Brand:
- CADDY
- Type:
- Adjustable Box Components and Conduit Supports
MATA Conduit to T-Grid Clip, 1" EMT
manufacturer discounts
learn about discounts
- $2.54 for $1,300.00+
- $2.40 for $2,000.00+
- $2.30 for $3,000.00+
$2.83 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$2.89 / EA
manufacturer discounts
learn about discounts
- $2.59 for $1,300.00+
- $2.45 for $2,000.00+
- $2.35 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
MATS Conduit to T-Grid Clip, 1" EMT
MATS Conduit to T-Grid Clip, 1" EMT
150
- Provides a method of securing conduit above acoustical tee bar
- Clip rotates for securing conduit in either horizontal or vertical orientation
- No tools required for installation
- Eliminates need for offset bending conduit
- Provides a method of securing conduit above acoustical tee bar
- Clip rotates for securing conduit in either horizontal or vertical orientation
- No tools required for installation
- Eliminates need for offset bending conduit
- UPC
- 782856608165
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Spring Steel
- Type:
- Adjustable Box Components and Conduit Supports
- Finish:
- nVent CADDY Armour
- Material:
- Spring Steel
- Standard:
- None
- Sub Brand:
- CADDY
- Type:
- Adjustable Box Components and Conduit Supports
MATS Conduit to T-Grid Clip, 1" EMT
manufacturer discounts
learn about discounts
- $2.59 for $1,300.00+
- $2.45 for $2,000.00+
- $2.35 for $3,000.00+
$2.89 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$11.93 / EA
manufacturer discounts
learn about discounts
- $10.70 for $1,300.00+
- $10.12 for $2,000.00+
- $9.71 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
B18-CPNAM Box/Conduit with Deck Angle Bracket, 1" EMT
B18-CPNAM Box/Conduit with Deck Angle Bracket, 1" EMT
150
- Meets the requirements of NEC� Section 300.4(E)
- Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws
- Supports box and conduit with one attachment point
- Meets the requirements of NEC� Section 300.4(E)
- Supports conduit or pipe 1-1/2" (38 mm) under the roof decking to prevent potential damage from nails or screws
- Supports box and conduit with one attachment point
- UPC
- 782856686156
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Steel; Spring Steel
- Type:
- Combination Box/Conduit
- Finish:
- nVent CADDY Armour; Plain
- Hole Size (Imperial) <Nom>:
- 1/4 in
- Material:
- Steel; Spring Steel
- Sub Brand:
- CADDY
- Type:
- Combination Box/Conduit
B18-CPNAM Box/Conduit with Deck Angle Bracket, 1" EMT
manufacturer discounts
learn about discounts
- $10.70 for $1,300.00+
- $10.12 for $2,000.00+
- $9.71 for $3,000.00+
$11.93 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$5.27 / EA
manufacturer discounts
learn about discounts
- $4.73 for $1,300.00+
- $4.47 for $2,000.00+
- $4.29 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Bolt Close Conduit/Pipe Clamp with Z Shot-Fire Bracket, 1"�1.315" OD, 1" EMT, 1" Rigid/Pipe
Bolt Close Conduit/Pipe Clamp with Z Shot-Fire Bracket, 1"�1.315" OD, 1" EMT, 1" Rigid/Pipe
150
- Retained bolt and built-in nut means there are less parts to handle or drop
- Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers
- Complete with shot-fire bracket and pre-assembled drive pin from DEWALT�
- Quickly and easily attaches to concrete, steel or composite metal decking
- Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
- ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT�
- Retained bolt and built-in nut means there are less parts to handle or drop
- Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers
- Complete with shot-fire bracket and pre-assembled drive pin from DEWALT�
- Quickly and easily attaches to concrete, steel or composite metal decking
- Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
- ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT�
- UPC
- 782856866350
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Steel
- Type:
- Deck
- Finish:
- Electrogalvanizing
- Height (Imperial) <Nom>:
- 4 3/8 in
- Material:
- Steel
- Outer Diameter (Imperial) <Max>:
- 1.315 in
- Outer Diameter (Imperial) <Min>:
- 1 in
- Static Load (lb):
- 100 lb
- Sub Brand:
- CADDY
- Type:
- Deck
- Width (Imperial) <Nom>:
- 3 1/8 in
Bolt Close Conduit/Pipe Clamp with Z Shot-Fire Bracket, 1"�1.315" OD, 1" EMT, 1" Rigid/Pipe
manufacturer discounts
learn about discounts
- $4.73 for $1,300.00+
- $4.47 for $2,000.00+
- $4.29 for $3,000.00+
$5.27 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$0.73 / EA
manufacturer discounts
learn about discounts
- $0.66 for $1,300.00+
- $0.62 for $2,000.00+
- $0.60 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Lathers Channel Conduit Clip, 1" EMT, 1 1/2" Channel
Lathers Channel Conduit Clip, 1" EMT, 1 1/2" Channel
150
- No tools required for installation
- No tools required for installation
- UPC
- 782856631989
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Steel
- Type:
- Lathers Channel Hangers
- Finish:
- No Finish
- Material:
- Steel
- Standard:
- None
- Static Load (lb):
- 50 lb
- Sub Brand:
- CADDY
- Type:
- Lathers Channel Hangers
Lathers Channel Conduit Clip, 1" EMT, 1 1/2" Channel
manufacturer discounts
learn about discounts
- $0.66 for $1,300.00+
- $0.62 for $2,000.00+
- $0.60 for $3,000.00+
$0.73 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders