Products
Image colors may not be accurate.
Please see details, or call (800) 462-7733 for more
information.
In stock (0)
Lead time: over 7 days
may be longer on small orders
This 3-Way Tape-to-Tape, Flex connector accessory is one of 8 patent-pending connectors for the 8T Series of LED Tape Light. Its unique inner workings allow it to install with the tape straight on (0-degrees) or rotated (180-degrees) - regardless of the tape polarity. So, the connector accessory can easily push into the base on the 8T tape without having to check polarity. Use this 3-Way Tape-to-Tape, Flex connector to connect the intersection of three strands of tape, as well as flex to accommo...
This 3-Way Tape-to-Tape, Flex connector accessory is one of 8 patent-pending connectors for the 8T Series of LED Tape Light. Its unique inner workings allow it to install with the tape straight on (0-degrees) or rotated (180-degrees) - regardless of the tape polarity. So, the connector accessory can easily push into the base on the 8T tape without having to check polarity. Use this 3-Way Tape-to-Tape, Flex connector to connect the intersection of three strands of tape, as well as flex to accommodate additional changes in direction.
150
- UPC
- 783927575515
- UNSPSC
- 39121435
- Country of Origin
- CHN
This 3-Way Tape-to-Tape, Flex connector accessory is one of 8 patent-pending connectors for the 8T Series of LED Tape Light. Its unique inner workings allow it to install with the tape straight on (0-...
In stock (0)
Lead time: over 7 days
may be longer on small orders
- Certification Agency
- PROP65
- Certification Number
- WARNING: This product contains material that, the State of California has determined, may cause cancer. www.P65Warnings.ca.gov/product
$0.57 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
TYPE K TEMPERATURE CLAMP (60020S) 1 EA
TYPE K TEMPERATURE CLAMP (60020S) 1 EA
150
- Works with any multimeter or clamp meter that accepts a Type K temperature probe
- Works with any multimeter or clamp meter that accepts a Type K temperature probe
- Spring loaded jaw clamps around heating or cooling pipe
- Fits pipes from 0.25 to 1.5 inches (6.4 to 38mm)
- Works with any multimeter or clamp meter that accepts a Type K temperature probe
- Works with any multimeter or clamp meter that accepts a Type K temperature probe
- Spring loaded jaw clamps around heating or cooling pipe
- Fits pipes from 0.25 to 1.5 inches (6.4 to 38mm)
- UPC
- 032886910081
- UNSPSC
- 39121435
- Country of Origin
- CHN
- Type:
- Temperature Clamp
- Length:
- 3.349
- Temperature Rating:
- -4 to 200 F
- Type:
- Temperature Clamp
TYPE K TEMPERATURE CLAMP (60020S) 1 EA
$0.57 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$1.20 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
In stock (0)
Lead time: over 7 days
may be longer on small orders
This 2 Pole 2 Wire Luminaire Ballast Disconnect enables fixture manufacturers and contractors to comply with the NEC 410.73 (G) CEC 30-308(4) requirements for a means to safely disconnect non-residential fluorescent fixtures while under load. Our Luminaire Ballast Disconnect 2 Pole 2 Wire features include: Patented Push-In Wire Insertion Technology Accommodates both Solid amp; Stranded Conductors Easy installation process - simply push Tinned stranded or solid wires into wiring ports Orange "...
This 2 Pole 2 Wire Luminaire Ballast Disconnect enables fixture manufacturers and contractors to comply with the NEC 410.73 (G) CEC 30-308(4) requirements for a means to safely disconnect non-residential fluorescent fixtures while under load. Our Luminaire Ballast Disconnect 2 Pole 2 Wire features include: Patented Push-In Wire Insertion Technology Accommodates both Solid amp; Stranded Conductors Easy installation process - simply push Tinned stranded or solid wires into wiring ports Orange "Safety" housing for ease of identification 2 amp; 3 Pole Touch Proof Luminaire Disconnects Male/Female Pluggable Touch-Proof Design Provides Safe Ballast Disconnect Unde Load Color Coded wire entry ports Electrolytic Tin-Plated internal Copper bus for high conductivity Meets NEC 2008 410.130G CEG Section 221.-06-Paragraph 30-308(4) Ballast Disconnect Safety Requirements for Non-Residential Fluorescent Fixtures UL2459 Compliant Housing material: Heavy Duty Nylon Thermoplastic, UL 94V-0 flame retardant Current: 3A @120V, 1.3A @ 277V, .75A @ 480V Rated 600V Working Temperature: (105deg;C) Wire Range: 12-18 AWG Solid or stranded Copper conductor Copper Wire Only cULus Listed (Bag 25 Pack) Order Qty of 25 = 1 Bag of 25 Below is more info on our Luminaire Ballast Disconnect 2 Pole 2 Wire
150
- This Luminaire Ballast Disconnect enables fixture manufacturers and contractors to comply with the NEC 410.73 (G) & CEC 30-308(4) requirements for a means to safely disconnect non-residential fluorescent fixtures while under load.
- Patented Push-In Wire Insertion Technology Accommodates both Solid & Stranded Conductors
- Easy installation process - simply push Tinned stranded or solid wires into wiring ports
- Orange "Safety" housing for ease of identification
- Male/Female Pluggable Touch-Proof Design Provides Safe Ballast Disconnect Unde Load
- Color Coded wire entry ports
- This Luminaire Ballast Disconnect enables fixture manufacturers and contractors to comply with the NEC 410.73 (G) & CEC 30-308(4) requirements for a means to safely disconnect non-residential fluorescent fixtures while under load.
- Patented Push-In Wire Insertion Technology Accommodates both Solid & Stranded Conductors
- Easy installation process - simply push Tinned stranded or solid wires into wiring ports
- Orange "Safety" housing for ease of identification
- Male/Female Pluggable Touch-Proof Design Provides Safe Ballast Disconnect Unde Load
- Color Coded wire entry ports
- UPC
- 601986230025
- UNSPSC
- 39121435
- Country of Origin
- CN
- Color:
- Orange
- Color:
- Orange
- Connector Type:
- Push in
- MAXIMUM VOLTAGE:
- 120/277
- Poles:
- 2
This 2 Pole 2 Wire Luminaire Ballast Disconnect enables fixture manufacturers and contractors to comply with the NEC 410.73 (G) CEC 30-308(4) requirements for a means to safely disconnect non-residen...
$1.20 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
In stock (0)
Lead time: over 7 days
may be longer on small orders
$1.27 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
In stock (0)
Lead time: over 7 days
may be longer on small orders
This 2 Pole 4 Wire Luminaire Ballast Disconnect enables fixture manufacturers and contractors to comply with the NEC 410.73 (G) CEC 30-308(4) requirements for a means to safely disconnect non-residential fluorescent fixtures while under load. Our Luminaire Ballast Disconnect 2 Pole 4 Wire features include: Patented Push-In Wire Insertion Technology Accommodates both Solid amp; Stranded Conductors Easy installation process - simply push Tinned stranded or solid wires into wiring ports Orange...
This 2 Pole 4 Wire Luminaire Ballast Disconnect enables fixture manufacturers and contractors to comply with the NEC 410.73 (G) CEC 30-308(4) requirements for a means to safely disconnect non-residential fluorescent fixtures while under load. Our Luminaire Ballast Disconnect 2 Pole 4 Wire features include: Patented Push-In Wire Insertion Technology Accommodates both Solid amp; Stranded Conductors Easy installation process - simply push Tinned stranded or solid wires into wiring ports Orange "Safety" housing for ease of identification 2 amp; 3 Pole Touch Proof Luminaire Disconnects Male/Female Pluggable Touch-Proof Design Provides Safe Ballast Disconnect Unde Load Color Coded wire entry ports Electrolytic Tin-Plated internal Copper bus for high conductivity Meets NEC 2008 410.130G CEG Section 221.-06-Paragraph 30-308(4) Ballast Disconnect Safety Requirements for Non-Residential Fluorescent Fixtures UL2459 Compliant Housing material: Heavy Duty Nylon Thermoplastic, UL 94V-0 flame retardant Current: 3A @120V, 1.3A @ 277V, .75A @ 480V Rated 600V Working Temperature: (105deg;C) Wire Range: 12-18 AWG Solid or stranded Copper conductor Copper Wire Only cULus Listed (Bag 25 Pack) Order Qty of 25 = 1 Bag of 25 Below is more info on our Luminaire Ballast Disconnect 2 Pole 4 Wire
150
- This Luminaire Ballast Disconnect enables fixture manufacturers and contractors to comply with the NEC 410.73 (G) & CEC 30-308(4) requirements for a means to safely disconnect non-residential fluorescent fixtures while under load.
- Patented Push-In Wire Insertion Technology Accommodates both Solid & Stranded Conductors
- Easy installation process - simply push Tinned stranded or solid wires into wiring ports
- Orange "Safety" housing for ease of identification
- 2 & 3 Pole Touch Proof Luminaire Disconnects
- Color Coded wire entry ports
- This Luminaire Ballast Disconnect enables fixture manufacturers and contractors to comply with the NEC 410.73 (G) & CEC 30-308(4) requirements for a means to safely disconnect non-residential fluorescent fixtures while under load.
- Patented Push-In Wire Insertion Technology Accommodates both Solid & Stranded Conductors
- Easy installation process - simply push Tinned stranded or solid wires into wiring ports
- Orange "Safety" housing for ease of identification
- 2 & 3 Pole Touch Proof Luminaire Disconnects
- Color Coded wire entry ports
- UPC
- 601986230049
- UNSPSC
- 39121435
- Country of Origin
- CN
- Color:
- Orange
- Color:
- Orange
- Connector Type:
- Push in
- MAXIMUM VOLTAGE:
- 120/277
- Poles:
- 2
This 2 Pole 4 Wire Luminaire Ballast Disconnect enables fixture manufacturers and contractors to comply with the NEC 410.73 (G) CEC 30-308(4) requirements for a means to safely disconnect non-residen...
$1.27 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
In stock (0)
Lead time: over 7 days
may be longer on small orders
$165.97 / EA
manufacturer discounts
learn about discounts
- $154.90 for $300.00+
- $147.53 for $500.00+
- $141.38 for $1,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
IDEAL, Lead Set Kit, Earth Resistance, Includes: Three Test Leads With Alligator Clips (5, 33, 33 MTR) On Reels, (2) Auxiliary Grounding Spikes
IDEAL, Lead Set Kit, Earth Resistance, Includes: Three Test Leads With Alligator Clips (5, 33, 33 MTR) On Reels, (2) Auxiliary Grounding Spikes
150
- UPC
- 783250688319
- UNSPSC
- 39121435
- Country of Origin
- TWN
- Type:
- Earth Resistance Lead Kit
- Standard:
- RoHS Compliant
- Type:
- Earth Resistance Lead Kit
IDEAL, Lead Set Kit, Earth Resistance, Includes: Three Test Leads With Alligator Clips (5, 33, 33 MTR) On Reels, (2) Auxiliary Grounding Spikes
manufacturer discounts
learn about discounts
- $154.90 for $300.00+
- $147.53 for $500.00+
- $141.38 for $1,000.00+
$165.97 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders