Products
$3.09 / EA
manufacturer discounts
learn about discounts
- $2.77 for $1,300.00+
- $2.62 for $2,000.00+
- $2.51 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Bulb Tee Clip, 3/16" Max Flange, 1/4" Screw
Bulb Tee Clip, 3/16" Max Flange, 1/4" Screw
150
- Provides means of support from underside of bulb tee
- Ceiling material not defaced when correctly applied
- Requires only a hammer to install
- Provides means of support from underside of bulb tee
- Ceiling material not defaced when correctly applied
- Requires only a hammer to install
- UPC
- 782856336389
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Spring Steel
- Type:
- Beam/Purlin
- Finish:
- nVent CADDY Armour
- Flange Thickness (Imperial) <Max>:
- 3/16 in
- Material:
- Spring Steel
- Standard:
- None
- Static Load (lb):
- 135 lb
- Sub Brand:
- CADDY
- Type:
- Beam/Purlin
Bulb Tee Clip, 3/16" Max Flange, 1/4" Screw
manufacturer discounts
learn about discounts
- $2.77 for $1,300.00+
- $2.62 for $2,000.00+
- $2.51 for $3,000.00+
$3.09 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$17.79 / EA
manufacturer discounts
learn about discounts
- $15.95 for $1,300.00+
- $15.09 for $2,000.00+
- $14.48 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Light Fixture Suspension Bar for T-Grid, Narrow 1/2" x 1/8" Replacement Bar
Light Fixture Suspension Bar for T-Grid, Narrow 1/2" x 1/8" Replacement Bar
150
- Reduces installation time
- No tools required for installation
- End clips rotate for mounting horizontal or vertical base plates
- Position of fixture is adjustable, simply slide to location
- Applicable to a wide variety of light fixtures
- Measure width of bar to find appropriate bar for fixture
- No center clips required
- Replaces fixture bar
- Reduces installation time
- No tools required for installation
- End clips rotate for mounting horizontal or vertical base plates
- Position of fixture is adjustable, simply slide to location
- Applicable to a wide variety of light fixtures
- Measure width of bar to find appropriate bar for fixture
- No center clips required
- Replaces fixture bar
- UPC
- 782856685197
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Spring Steel
- Type:
- Acoustical Lighting Hangers
- Finish:
- nVent CADDY Armour
- Material:
- Spring Steel
- Standard:
- None
- Sub Brand:
- CADDY
- Type:
- Acoustical Lighting Hangers
Light Fixture Suspension Bar for T-Grid, Narrow 1/2" x 1/8" Replacement Bar
manufacturer discounts
learn about discounts
- $15.95 for $1,300.00+
- $15.09 for $2,000.00+
- $14.48 for $3,000.00+
$17.79 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$2.50 / EA
manufacturer discounts
learn about discounts
- $2.24 for $1,300.00+
- $2.12 for $2,000.00+
- $2.03 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
PATS Conduit to T-Grid Clip, Side Mount, 1" EMT
PATS Conduit to T-Grid Clip, Side Mount, 1" EMT
150
- Provides a method of supporting conduit above acoustical tee bar
- Clip rotates for securing conduit in either horizontal or vertical orientation
- No tools required for installation
- Eliminates need for offset bending conduit
- Provides a method of supporting conduit above acoustical tee bar
- Clip rotates for securing conduit in either horizontal or vertical orientation
- No tools required for installation
- Eliminates need for offset bending conduit
- UPC
- 782856608677
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Spring Steel
- Type:
- Adjustable Box Components and Conduit Supports
- Finish:
- nVent CADDY Armour
- Material:
- Spring Steel
- Sub Brand:
- CADDY
- Type:
- Adjustable Box Components and Conduit Supports
PATS Conduit to T-Grid Clip, Side Mount, 1" EMT
manufacturer discounts
learn about discounts
- $2.24 for $1,300.00+
- $2.12 for $2,000.00+
- $2.03 for $3,000.00+
$2.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$7.27 / EA
manufacturer discounts
learn about discounts
- $6.51 for $1,300.00+
- $6.16 for $2,000.00+
- $5.91 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
MC/AC Cable Support Bracket with C Purlin Clip, 14-3 to 10-2 MC/AC, 8 Cable, 1/16"�1/4" Flange
MC/AC Cable Support Bracket with C Purlin Clip, 14-3 to 10-2 MC/AC, 8 Cable, 1/16"�1/4" Flange
150
- Neatly isolates, supports and secures MC/AC cables
- Properly spaces MC/AC cable to help eliminate bundling and NEC� & CEC derating issues
- Results in a "neat and workmanlike" installation
- Neatly isolates, supports and secures MC/AC cables
- Properly spaces MC/AC cable to help eliminate bundling and NEC� & CEC derating issues
- Results in a "neat and workmanlike" installation
- UPC
- 782856469636
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Steel
- Type:
- Purlin
- Finish:
- Electrogalvanizing
- Flange Thickness (Imperial) <Max>:
- 1/4 in
- Material:
- Steel
- Outer Diameter (Imperial) <Max>:
- 0.560 in
- Outer Diameter (Imperial) <Min>:
- 0.430 in
- Sub Brand:
- CADDY
- Type:
- Purlin
MC/AC Cable Support Bracket with C Purlin Clip, 14-3 to 10-2 MC/AC, 8 Cable, 1/16"�1/4" Flange
manufacturer discounts
learn about discounts
- $6.51 for $1,300.00+
- $6.16 for $2,000.00+
- $5.91 for $3,000.00+
$7.27 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$3.58 / EA
manufacturer discounts
learn about discounts
- $3.21 for $1,300.00+
- $3.04 for $2,000.00+
- $2.91 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Push In Conduit Clamp with Z Shot-Fire Bracket, 1" EMT, 1.181"�1.378" OD
Push In Conduit Clamp with Z Shot-Fire Bracket, 1" EMT, 1.181"�1.378" OD
150
- Push-in installation of conduit
- Eliminates need for offset bending conduit
- Complete with shot-fire bracket and pre-assembled drive pin from DEWALT�
- Quickly and easily attaches to concrete, steel or composite metal decking
- Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
- ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT�
- Push-in installation of conduit
- Eliminates need for offset bending conduit
- Complete with shot-fire bracket and pre-assembled drive pin from DEWALT�
- Quickly and easily attaches to concrete, steel or composite metal decking
- Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
- ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT�
- UPC
- 782856866329
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Steel; Spring Steel
- Type:
- Deck
- Finish:
- Electrogalvanized; nVent CADDY Armour
- Height (Imperial) <Nom>:
- 3 7/8 in
- Material:
- Steel; Spring Steel
- Outer Diameter (Imperial) <Max>:
- 1.378 in
- Outer Diameter (Imperial) <Min>:
- 1.181 in
- Sub Brand:
- CADDY
- Type:
- Deck
- Width (Imperial) <Nom>:
- 2 3/4 in
Push In Conduit Clamp with Z Shot-Fire Bracket, 1" EMT, 1.181"�1.378" OD
manufacturer discounts
learn about discounts
- $3.21 for $1,300.00+
- $3.04 for $2,000.00+
- $2.91 for $3,000.00+
$3.58 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$3.88 / EA
manufacturer discounts
learn about discounts
- $3.48 for $1,300.00+
- $3.29 for $2,000.00+
- $3.16 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Bolt Close Conduit/Pipe Clamp with Shot-Fire Bracket, 0.67"�0.84" OD, 1/2" EMT, 1/2" Rigid/Pipe
Bolt Close Conduit/Pipe Clamp with Shot-Fire Bracket, 0.67"�0.84" OD, 1/2" EMT, 1/2" Rigid/Pipe
150
- Retained bolt and built-in nut means there are less parts to handle or drop
- Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers
- Complete with shot-fire bracket and pre-assembled drive pin from DEWALT�
- Quickly and easily attaches to concrete, steel or composite metal decking
- Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
- ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT�
- Retained bolt and built-in nut means there are less parts to handle or drop
- Combo head bolt works with slotted, hex, #3 phillips or #2 robertson drivers
- Complete with shot-fire bracket and pre-assembled drive pin from DEWALT�
- Quickly and easily attaches to concrete, steel or composite metal decking
- Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
- ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT�
- UPC
- 782856866428
- UNSPSC
- 39121701
- Country of Origin
- US
- Material:
- Steel
- Type:
- Deck
- Finish:
- Electrogalvanizing
- Height (Imperial) <Nom>:
- 1 3/4 in
- Material:
- Steel
- Outer Diameter (Imperial) <Max>:
- 0.840 in
- Outer Diameter (Imperial) <Min>:
- 0.670 in
- Static Load (lb):
- 100 lb
- Sub Brand:
- CADDY
- Type:
- Deck
- Width (Imperial) <Nom>:
- 3 3/8 in
Bolt Close Conduit/Pipe Clamp with Shot-Fire Bracket, 0.67"�0.84" OD, 1/2" EMT, 1/2" Rigid/Pipe
manufacturer discounts
learn about discounts
- $3.48 for $1,300.00+
- $3.29 for $2,000.00+
- $3.16 for $3,000.00+
$3.88 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders