Products
$359.67 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyolefin construction that provides moisture seal protection.
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated applications. It features a cross linked polyolefin construction that provides moisture seal protection.
3M™ Heat Shrink Cable Sleeve ITCSN is a split resistant sleeve with a factory applied adhesive/seala...150
3M™ Heat Shrink Cable Sleeve ITCSN is a split resistant sleeve with a factory applied adhesive/sealant that offers reliable performance for electrical splices, connections and terminations. It is perfect for insulating secondary splices, direct buried, submersible or dig in repairs, as well as physical protection of high voltage, air insulated connectors or lugs. It withstands temperatures of 67 to 230 degrees F ( 55 to 110 degrees C). UL Listed, CSA Certified and RoHS 2011/65/EU Compliant.
- Superior resistance to abrasion, corrosion and chemicals
- Offers reliable performance for electrical splices, connections and terminations
- Suitable for insulating secondary splices, as well as direct buried, submersible and dig-in repairs
- Made of black cross-linked polyolefin
- Superior resistance to abrasion, corrosion and chemicals
- Offers reliable performance for electrical splices, connections and terminations
- Suitable for insulating secondary splices, as well as direct buried, submersible and dig-in repairs
- Made of black cross-linked polyolefin
- UPC
- 054007089636
- UNSPSC
- 39121723
- Country of Origin
- USA
- Color:
- Black
- Type:
- Heavy Wall
- Voltage Rating:
- 600 V
- Color:
- Black
- Continuous Operating Temperature:
- 110 degrees - 230 degrees
- Dielectric Strength:
- 500 V/mil
- Heat Shock:
- No dripping, flowing, cracking
- Length:
- 6 in
- Low Temperature Flexibility:
- No Cracking
- Minimum Shrink Temperature:
- 250 degrees
- Shrink Ratio:
- 3 to 1
- Standard:
- UL, CSA
- Type:
- Heavy Wall
- Voltage Rating:
- 600 V
- Volume Resistivity:
- 1 x 10(14) ohm/cm
- Water Absorption:
- 0.05%
3M™ Heat Shrink Cable Sleeve ITCSN is a heavy wall sleeve that provides abrasion, corrosion and chemical resistance. This sleeve has a 3:1 shrink ratio to offer electrical insulation for 1 kV rated ap...
$359.67 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$1,571.36 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Bus Bar Heat Shrink Tubing BBI is a flame retardant tubing that provides reliable protection and insulation for 5 to 35 kV rated applications. The cross linked polyolefin construction is split and solvent resistant while offering good tracking resistance. It offers a tight fit for rectangular, square or round bus bars.
3M™ Bus Bar Heat Shrink Tubing BBI is a flame retardant tubing that provides reliable protection and insulation for 5 to 35 kV rated applications. The cross linked polyolefin construction is split and solvent resistant while offering good tracking resistance. It offers a tight fit for rectangular, square or round bus bars.
When you need your wires insulated, your choice should be 3M™ BBI-5A Bus Bar Heat Shrink Tubing. It...150
When you need your wires insulated, your choice should be 3M™ BBI-5A Bus Bar Heat Shrink Tubing. It has a 110 kV-rated insulation level to protect against random surges that could damage your installation. The insulation cover is color-coded so you can quickly identify the wire while maintaining an aesthetic appearance. When heated, it shrinks to the size of your wire for a secure fit. It can be used in outdoor applications, withstanding temperatures of -67 to 230 degrees F (-55 to 110 degrees C). This shrink tubing is RoHS 2011/65/EU Compliant and ASTM, IEC, ANSI, IEEE Approved for use in insulating bolted connections of round, square or rectangular bus bars.
- Suitable for copper or aluminum bus bars, metal-enclosed bus bars, metal-clad switchgear and substation switchgear
- Made of red cross-linked polyolefin
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- Flame-retardant
- Suitable for copper or aluminum bus bars, metal-enclosed bus bars, metal-clad switchgear and substation switchgear
- Made of red cross-linked polyolefin
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- Flame-retardant
- UPC
- 051135357316
- UNSPSC
- 39121723
- Country of Origin
- USA
- Color:
- Red
- Type:
- Bus Bar
- Voltage Rating:
- 35,000 V
- Color:
- Red
- Dielectric Strength:
- 550 V/mil
- Heat Shock:
- Pass
- Inside Diameter:
- 2.04
- Length:
- 50 ft
- Low Temperature Flexibility:
- Pass
- Outside Diameter:
- 5.3 in
- Shrink Ratio:
- Not Applicable
- Standard:
- ASTM, IEC, ANSI/IEEE
- Thickness:
- 0.043
- Type:
- Bus Bar
- Voltage Rating:
- 35,000 V
- Volume Resistivity:
- 10(13) ohm/cm
- Water Absorption:
- 0.30%
3M™ Bus Bar Heat Shrink Tubing BBI is a flame retardant tubing that provides reliable protection and insulation for 5 to 35 kV rated applications. The cross linked polyolefin construction is split an...
$1,571.36 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$63.26 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
In stock (0)
Lead time: over 7 days
may be longer on small orders
900 - 1000 MCM Cold Shrink Splice Kits - Cold Shrink Submersible Electrical Splice Kits Are A Great labor Saving Alternative to Heat Shrink or Taping.900 - 1000 MCM Cold Shrink Splice Kits features include: Cold Shrink Electrical Splice Kits save money - simplifies splicing and repairing cable compared to messy multi part splicing kits Provides a Reliable, Submersible Rated electrical connection for most cable constructions 1000 Volt Maximum Silicone Rubber Jacketing Material Durable Tear Resis...
900 - 1000 MCM Cold Shrink Splice Kits - Cold Shrink Submersible Electrical Splice Kits Are A Great labor Saving Alternative to Heat Shrink or Taping.900 - 1000 MCM Cold Shrink Splice Kits features include: Cold Shrink Electrical Splice Kits save money - simplifies splicing and repairing cable compared to messy multi part splicing kits Provides a Reliable, Submersible Rated electrical connection for most cable constructions 1000 Volt Maximum Silicone Rubber Jacketing Material Durable Tear Resistant Removable Rip-Cord Core 2:1 Shrink Ratio No Tool or Heat Source Required UV ResitantConforms to ANSI C119.1 1986; Submersible amp; Raintight Order Qty of 1 = 1 Piece Below is more info on our 900 - 1000 MCM Cold Shrink Splice Kits
150
- Cold Shrink Splice Kits - Cold Shrink Submersible Electrical Splice Kits Are A Great labor Saving Alternative to Heat Shrink or Taping.
- Cold Shrink Electrical Splice Kits save money - simplifies splicing and repairing cable compared to messy multi part splicing kits
- Provides a Reliable, Submersible Rated electrical connection for most cable constructions
- 1000 Volt Maximum
- Silicone Rubber Jacketing Material
- 2:1 Shrink Ratio
- Cold Shrink Splice Kits - Cold Shrink Submersible Electrical Splice Kits Are A Great labor Saving Alternative to Heat Shrink or Taping.
- Cold Shrink Electrical Splice Kits save money - simplifies splicing and repairing cable compared to messy multi part splicing kits
- Provides a Reliable, Submersible Rated electrical connection for most cable constructions
- 1000 Volt Maximum
- Silicone Rubber Jacketing Material
- 2:1 Shrink Ratio
- UPC
- 601986683104
- UNSPSC
- 39121723
- Country of Origin
- TW
- Material:
- Silicone Rubber
- Application Range:
- 1.32" - 2.65"
- Conductor Range:
- 900 - 1000
- Length:
- 9"
- MAXIMUM VOLTAGE:
- 1000 Volts
- Material:
- Silicone Rubber
- Product Length:
- 9"
- Tubing Type:
- Cold Shrink
900 - 1000 MCM Cold Shrink Splice Kits - Cold Shrink Submersible Electrical Splice Kits Are A Great labor Saving Alternative to Heat Shrink or Taping.900 - 1000 MCM Cold Shrink Splice Kits features in...
$63.26 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
In stock (0)
Lead time: over 7 days
may be longer on small orders
$36.85 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications. This tubing has a 2:1 shrink ratio and provides flame retardant insulation for 600V rated applications. It has a flexible polyolefin construction that offers moisture seal protection.
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications. This tubing has a 2:1 shrink ratio and provides flame retardant insulation for 600V rated applications. It has a flexible polyolefin construction that offers moisture seal protection.
3M™ Heat Shrink Tubing FP-301 is color coded for quick and easy identification of the wire. This spl...150
3M™ Heat Shrink Tubing FP-301 is color coded for quick and easy identification of the wire. This split resistant, flame retardant tubing is used as shrink fit, electrical insulation over cable splices or terminations. The high expansion ratio tubing is mechanically tough, easily markable and resists cold flow. It is ideal for lightweight wire harness covering, fire resistant covering, wire marking, wire bundling and component packaging. It withstands temperatures of 67 to 275 degrees F ( 55 to 135 degrees C). UL Listed, SAE AS23053/5, Class 1, CSA Certified and RoHS 2011/65/EU Compliant.
- Balances electrical, physical and chemical properties for various industrial and military applications
- Offers shrink-fit protection and strain relief of wires, solder joints, terminals and connections
- Suitable for lightweight wire-harness covering, fire-resistant covering, wire marking, wire bundling and component packaging
- Made of flexible polyolefin
- Balances electrical, physical and chemical properties for various industrial and military applications
- Offers shrink-fit protection and strain relief of wires, solder joints, terminals and connections
- Suitable for lightweight wire-harness covering, fire-resistant covering, wire marking, wire bundling and component packaging
- Made of flexible polyolefin
- UPC
- 051128596401
- UNSPSC
- 39121723
- Country of Origin
- USA
- Color:
- Black
- Type:
- Thin-Wall Flexible Polyolefin
- Color:
- Black
- Continuous Operating Temperature:
- 55 Degrees C to +135 Degrees C
- Dielectric Strength:
- 900 Volt
- Length:
- 48 in
- Outside Diameter:
- 0.125 in
- Shrink Ratio:
- 2:1
- Standard:
- UL Recognized, CSA Certified, ABS, and AMS 3636 & 3637
- Type:
- Thin-Wall Flexible Polyolefin
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications....
$36.85 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$840.22 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Bus Bar Heat Shrink Tubing BBI is a flame retardant tubing that provides reliable protection and insulation for 5 to 35 kV rated applications. The cross linked polyolefin construction is split and solvent resistant while offering good tracking resistance. It offers a tight fit for rectangular, square or round bus bars.
3M™ Bus Bar Heat Shrink Tubing BBI is a flame retardant tubing that provides reliable protection and insulation for 5 to 35 kV rated applications. The cross linked polyolefin construction is split and solvent resistant while offering good tracking resistance. It offers a tight fit for rectangular, square or round bus bars.
150
- Suitable for copper or aluminum bus bars, metal-enclosed bus bars, metal-clad switchgear and substation switchgear
- Made of red cross-linked polyolefin
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- Flame-retardant
- Suitable for copper or aluminum bus bars, metal-enclosed bus bars, metal-clad switchgear and substation switchgear
- Made of red cross-linked polyolefin
- Withstands temperatures of -67 to 230 degrees F (-55 to 110 degrees C)
- Flame-retardant
- UPC
- 051135357361
- UNSPSC
- 39121723
- Country of Origin
- USA
- Color:
- Red
- Type:
- Bus Bar
- Voltage Rating:
- 35,000 V
- Color:
- Red
- Dielectric Strength:
- 550 V/mil
- Heat Shock:
- Pass
- Inside Diameter:
- 3.18
- Length:
- 20 ft
- Low Temperature Flexibility:
- Pass
- Outside Diameter:
- 8.25
- Shrink Ratio:
- Not Applicable
- Standard:
- ASTM, IEC, ANSI/IEEE
- Thickness:
- 0.049
- Type:
- Bus Bar
- Voltage Rating:
- 35,000 V
- Volume Resistivity:
- 10(13) ohm/cm
- Water Absorption:
- 0.30%
3M™ Bus Bar Heat Shrink Tubing BBI is a flame retardant tubing that provides reliable protection and insulation for 5 to 35 kV rated applications. The cross linked polyolefin construction is split an...
$840.22 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$41.64 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications. This tubing has a 2:1 shrink ratio and provides flame retardant insulation for 600V rated applications. It has a flexible polyolefin construction that offers moisture seal protection.
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications. This tubing has a 2:1 shrink ratio and provides flame retardant insulation for 600V rated applications. It has a flexible polyolefin construction that offers moisture seal protection.
3M™ Heat Shrink Tubing FP-301 is color coded for quick and easy identification of the wire. This spl...150
3M™ Heat Shrink Tubing FP-301 is color coded for quick and easy identification of the wire. This split resistant, flame retardant tubing is used as shrink fit, electrical insulation over cable splices or terminations. The high expansion ratio tubing is mechanically tough, easily markable and resists cold flow. It is ideal for lightweight wire harness covering, fire resistant covering, wire marking, wire bundling and component packaging. It withstands temperatures of 67 to 275 degrees F ( 55 to 135 degrees C). UL Listed, SAE AS23053/5, Class 1, CSA Certified and RoHS 2011/65/EU Compliant.
- Balances electrical, physical and chemical properties for various industrial and military applications
- Offers shrink-fit protection and strain relief of wires, solder joints, terminals and connections
- Suitable for lightweight wire-harness covering, fire-resistant covering, wire marking, wire bundling and component packaging
- Made of flexible polyolefin
- Balances electrical, physical and chemical properties for various industrial and military applications
- Offers shrink-fit protection and strain relief of wires, solder joints, terminals and connections
- Suitable for lightweight wire-harness covering, fire-resistant covering, wire marking, wire bundling and component packaging
- Made of flexible polyolefin
- UPC
- 051128595718
- UNSPSC
- 39121723
- Country of Origin
- USA
- Color:
- Colorless
- Type:
- Single (Thin) Wall
- Color:
- Colorless
- Continuous Operating Temperature:
- -67 degrees to 275 degrees
- Dielectric Strength:
- 900 V/mil
- Flammability:
- Pass
- Heat Aging:
- Elongation 175%
- Heat Shock:
- No dripping, clowing, cracking, passes mandrel wrap test
- Inside Diameter:
- 0.093
- Length:
- 48 in
- Low Temperature Flexibility:
- No Cracking
- Minimum Shrink Temperature:
- 212 degrees
- Outside Diameter:
- 0.187 in
- Shrink Ratio:
- 2 to 1
- Standard:
- UL, CSA, ABS
- Thickness:
- 0.02
- Type:
- Single (Thin) Wall
- Volume Resistivity:
- 10(15) ohm/cm
- Water Absorption:
- 0.20%
3M™ Heat Shrink Tubing FP-301 is a general purpose, thin wall tubing that provides a balance of electrical, physical and chemical properties, making it ideal for industrial and military applications....
$41.64 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$163.63 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Heat Shrink End Cap SKE provides mechanical and environmental protection as well as sealing to cable ends. The semi rigid, flame retardant polyolefin construction makes the end cap suitable for heavy duty applications. The adhesive lining forms a permanent, flexible and water resistant barrier.
3M™ Heat Shrink End Cap SKE provides mechanical and environmental protection as well as sealing to cable ends. The semi rigid, flame retardant polyolefin construction makes the end cap suitable for heavy duty applications. The adhesive lining forms a permanent, flexible and water resistant barrier.
3M™ Heat Shrink Heavy Duty End Cap SKE has a flexible adhesive lining and is suitable for use on a v...150
3M™ Heat Shrink Heavy Duty End Cap SKE has a flexible adhesive lining and is suitable for use on a variety of rubbers, plastics and metals. It withstands a wide temperature range of 67 to 230 degrees F ( 55 to 110 degrees C). RoHS 2011/65/EU Compliant.
- Offers mechanical and environmental protection to cable ends
- Adhesive lining offers flexible, water-resistant barrier
- Suitable for heavy-duty applications
- Comes in black color
- Offers mechanical and environmental protection to cable ends
- Adhesive lining offers flexible, water-resistant barrier
- Suitable for heavy-duty applications
- Comes in black color
- UPC
- 051138481544
- UNSPSC
- 39121723
- Country of Origin
- CHN
- Color:
- Black
- Type:
- Heat Shrink Heavy-Duty End Cap
- Color:
- Black
- Length:
- 0.3 in
- Type:
- Heat Shrink Heavy-Duty End Cap
3M™ Heat Shrink End Cap SKE provides mechanical and environmental protection as well as sealing to cable ends. The semi rigid, flame retardant polyolefin construction makes the end cap suitable for he...
$163.63 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$23.20 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
3M™ Heat Shrink Cable Breakout Boot 2 insulates and seals cable breakouts in multi conductor armored or sheathed cables. This heavy duty boot offers good electrical and mechanical protection. The cross linked, MIL I 81765 1 qualified polyolefin construction is semi rigid and flame retardant.
3M™ Heat Shrink Cable Breakout Boot 2 insulates and seals cable breakouts in multi conductor armored or sheathed cables. This heavy duty boot offers good electrical and mechanical protection. The cross linked, MIL I 81765 1 qualified polyolefin construction is semi rigid and flame retardant.
3M™ Heat Shrink Breakout Boot has an internal coating of adhesive that ensures reliable environmenta...150
3M™ Heat Shrink Breakout Boot has an internal coating of adhesive that ensures reliable environmental sealing of cable breakouts in cables and conduit ends. RoHS 2011/65/EU Compliant.
- Ensures excellent insulation and void-free sealing of cable breakouts
- Internal coating of adhesive offers reliable environmental sealing
- Provides maximum electrical and mechanical protection
- Semi-rigid, flame-retardant polyolefin construction
- Ensures excellent insulation and void-free sealing of cable breakouts
- Internal coating of adhesive offers reliable environmental sealing
- Provides maximum electrical and mechanical protection
- Semi-rigid, flame-retardant polyolefin construction
- UPC
- 054007587934
- UNSPSC
- 39121723
- Country of Origin
- GBR
- Color:
- Black
- Type:
- Breatout Boot
- Color:
- Black
- Type:
- Breatout Boot
3M™ Heat Shrink Cable Breakout Boot 2 insulates and seals cable breakouts in multi conductor armored or sheathed cables. This heavy duty boot offers good electrical and mechanical protection. The cros...
$23.20 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders