Products
$60.12 / EA
manufacturer discounts
learn about discounts
- $53.90 for $1,300.00+
- $51.00 for $2,000.00+
- $48.92 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
nVent CADDY Pyramid Tool-Free Pipe Support Kit, 19"
nVent CADDY Pyramid Tool-Free Pipe Support Kit, 19"
150
- Push-in clamps install without the need for additional tools or strut clamps
- Ready to use out of the box, saving installation time and labor
- Plastic clamps and base will not corrode pipe
- Clamps come in two different sizes to fit project needs
- Base includes multiple holes to accommodate a variety of clamp sizes and configurations
- Additional clamps can be purchased separately for additional pipe runs
- Foam bottom offers low abrasion interface for better roof membrane protection
- Provides superior load distribution, even with varying rooftop surfaces
- Compatible with roof surfaces including single ply, bituminous, metal and spray foam
- Multiple sizes and load ratings offer the ability to tailor the solution to the application
- Push-in clamps install without the need for additional tools or strut clamps
- Ready to use out of the box, saving installation time and labor
- Plastic clamps and base will not corrode pipe
- Clamps come in two different sizes to fit project needs
- Base includes multiple holes to accommodate a variety of clamp sizes and configurations
- Additional clamps can be purchased separately for additional pipe runs
- Foam bottom offers low abrasion interface for better roof membrane protection
- Provides superior load distribution, even with varying rooftop surfaces
- Compatible with roof surfaces including single ply, bituminous, metal and spray foam
- Multiple sizes and load ratings offer the ability to tailor the solution to the application
- UPC
- 782856846413
- UNSPSC
- 30151609
- Country of Origin
- US
- Material:
- Polyethylene, Polypropylene, Nylon
- Type:
- CADDY PYRAMID Rooftop Systems
- Height (Imperial) <Nom>:
- 4 in
- Length:
- 19 in
- Material:
- Polyethylene, Polypropylene, Nylon
- Special features:
- Push-in clamps install without the need for additional tools or strut clamps. Ready to use out of the box, saving installation time and labor. Plastic clamps and base will not corrode pipe. Clamps come in two different sizes to fit project needs. Base includes multiple holes to accommodate a variety of clamp sizes and configurations . Additional clamps can be purchased separately for additional pipe runs. Foam bottom offers low abrasion interface for better roof membrane protection. Provides superior load distribution, even with varying rooftop surfaces. Compatible with roof surfaces including single ply, bituminous, metal and spray foam. Multiple sizes and load ratings offer the ability to tailor the solution to the application. Easy to transport to the roof
- Static Load (lb):
- 1500 lb
- Sub Brand:
- CADDY
- Thickness:
- 4"
- Type:
- CADDY PYRAMID Rooftop Systems
- Width:
- 8 in
- Width (Imperial) <Nom>:
- 8 in
nVent CADDY Pyramid Tool-Free Pipe Support Kit, 19"
manufacturer discounts
learn about discounts
- $53.90 for $1,300.00+
- $51.00 for $2,000.00+
- $48.92 for $3,000.00+
$60.12 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
- Certification Agency
- PROP65
- Certification Number
- No
$13.53 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
1-1/4" to 1-1/2" Galvanized roof flashing, 22 gauge with neoprene seal.
1-1/4" to 1-1/2" Galvanized roof flashing, 22 gauge with neoprene seal.
150
- UPC
- 018997006240
- UNSPSC
- 30151602
- Country of Origin
- CN
- Type:
- Roof Flashing
- Pipe Size:
- 1-1/4 to 1-1/2 IN
- Type:
- Roof Flashing
1-1/4" to 1-1/2" Galvanized roof flashing, 22 gauge with neoprene seal.
$13.53 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$1,794.02 / EA
manufacturer discounts
learn about discounts
- $1,608.43 for $1,300.00+
- $1,521.82 for $2,000.00+
- $1,459.96 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
nVent CADDY Pyramid Crossover Ladder, 90�, 20" Walkway Height, 2 Steps
nVent CADDY Pyramid Crossover Ladder, 90�, 20" Walkway Height, 2 Steps
150
- Vertical ladders ideal for tight spaces
- Interchangeable components are easily assembled yielding labor-saving and quick installations
- nVent CADDY Pyramid bases provide superior load distribution and roof membrane compatibility
- Foam bottom offers low abrasion interface for better roof membrane protection
- Aluminum construction designed to withstand harsh environments
- Walking surfaces with serrated tread provides maximum slip resistance and drainage
- Compliant with OSHA, Cal/OSHA and ANSI� standards
- Vertical ladders ideal for tight spaces
- Interchangeable components are easily assembled yielding labor-saving and quick installations
- nVent CADDY Pyramid bases provide superior load distribution and roof membrane compatibility
- Foam bottom offers low abrasion interface for better roof membrane protection
- Aluminum construction designed to withstand harsh environments
- Walking surfaces with serrated tread provides maximum slip resistance and drainage
- Compliant with OSHA, Cal/OSHA and ANSI� standards
- UPC
- 782856842828
- UNSPSC
- 30151609
- Country of Origin
- US
- Material:
- Aluminum, Polypropylene, Polyethylene
- Type:
- nVent CADDY Pyramid Crossovers and Walkways
- Base Width:
- 12 in
- Height (Imperial) <Nom>:
- 62 in
- Ladder Height:
- 62 in
- Load Capacity:
- 500 lb
- Material:
- Aluminum, Polypropylene, Polyethylene
- Number Of Steps:
- 2
- Platform Depth:
- 29.2 in
- Platform Height:
- 62 in
- Platform Width:
- 52.4 in
- Static Load (lb):
- 500 lb
- Sub Brand:
- CADDY
- Type:
- nVent CADDY Pyramid Crossovers and Walkways
- Width (Imperial) <Nom>:
- 52.400 in
nVent CADDY Pyramid Crossover Ladder, 90�, 20" Walkway Height, 2 Steps
manufacturer discounts
learn about discounts
- $1,608.43 for $1,300.00+
- $1,521.82 for $2,000.00+
- $1,459.96 for $3,000.00+
$1,794.02 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$516.04 / EA
manufacturer discounts
learn about discounts
- $462.66 for $1,300.00+
- $437.75 for $2,000.00+
- $419.95 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
nVent CADDY Pyramid Crossover Support Tower, 40" Walkway Height
nVent CADDY Pyramid Crossover Support Tower, 40" Walkway Height
150
- Additional support towers ideal for supporting long walkways at varying heights
- Interchangeable components are easily assembled yielding labor-saving and quick installations
- nVent CADDY Pyramid bases provide superior load distribution and roof membrane compatibility
- Foam bottom offers low abrasion interface for better roof membrane protection
- Aluminum construction designed to withstand harsh environments
- Walking surfaces with serrated tread provides maximum slip resistance and drainage
- Compliant with OSHA, Cal/OSHA and ANSI� standards
- Additional support towers ideal for supporting long walkways at varying heights
- Interchangeable components are easily assembled yielding labor-saving and quick installations
- nVent CADDY Pyramid bases provide superior load distribution and roof membrane compatibility
- Foam bottom offers low abrasion interface for better roof membrane protection
- Aluminum construction designed to withstand harsh environments
- Walking surfaces with serrated tread provides maximum slip resistance and drainage
- Compliant with OSHA, Cal/OSHA and ANSI� standards
- UPC
- 782856842897
- UNSPSC
- 30151609
- Country of Origin
- US
- Material:
- Aluminum, Polypropylene, Polyethylene
- Type:
- nVent CADDY Pyramid Crossovers and Walkways
- Adjustable Height:
- No
- Base Width:
- 2 in
- Extended Ladder Height:
- 60 in
- Height (Imperial) <Nom>:
- 60 in
- Ladder Height:
- 40 in
- Load Capacity:
- 500 lb
- Material:
- Aluminum, Polypropylene, Polyethylene
- Static Load (lb):
- 500 lb
- Sub Brand:
- CADDY
- Type:
- nVent CADDY Pyramid Crossovers and Walkways
- Width (Imperial) <Nom>:
- 52.900 in
nVent CADDY Pyramid Crossover Support Tower, 40" Walkway Height
manufacturer discounts
learn about discounts
- $462.66 for $1,300.00+
- $437.75 for $2,000.00+
- $419.95 for $3,000.00+
$516.04 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$45.90 / EA
manufacturer discounts
learn about discounts
- $41.15 for $1,300.00+
- $38.93 for $2,000.00+
- $37.35 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Rooftop Pyramid 50 Foam-Based Support, EG, 4"
Rooftop Pyramid 50 Foam-Based Support, EG, 4"
150
- Replaces slow and labor-intensive installation methods
- Supports pipe, conduit, cable tray and equipment on roofs and below raised floors
- Easily increase load capacity by combining similar nVent CADDY Pyramid supports
- Protects the roof membrane while absorbing shock and vibration, without absorbing water
- Metal cover protects against weather and other environmental conditions, such as bird damage
- Replaces slow and labor-intensive installation methods
- Supports pipe, conduit, cable tray and equipment on roofs and below raised floors
- Easily increase load capacity by combining similar nVent CADDY Pyramid supports
- Protects the roof membrane while absorbing shock and vibration, without absorbing water
- Metal cover protects against weather and other environmental conditions, such as bird damage
- UPC
- 782856586050
- UNSPSC
- 30151609
- Country of Origin
- US
- Material:
- Steel; Polyethylene
- Type:
- CADDY PYRAMID Rooftop Systems
- Finish:
- Electrogalvanized
- Height (Imperial) <Nom>:
- 4 in
- Length:
- 10 3/8"
- Length (imperial) <Nom>:
- 10 3/8 in
- Material:
- Steel; Polyethylene
- Material of Construction:
- Steel; Polyethylene
- Static Load (lb):
- 50 lb
- Sub Brand:
- CADDY
- Type:
- CADDY PYRAMID Rooftop Systems
- Width:
- 4 in
- Width (Imperial) <Nom>:
- 4 in
Rooftop Pyramid 50 Foam-Based Support, EG, 4"
manufacturer discounts
learn about discounts
- $41.15 for $1,300.00+
- $38.93 for $2,000.00+
- $37.35 for $3,000.00+
$45.90 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$36.79 / EA
manufacturer discounts
learn about discounts
- $32.99 for $1,300.00+
- $31.21 for $2,000.00+
- $29.94 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
nVent CADDY Pyramid Universal Support, 10" x 4"
nVent CADDY Pyramid Universal Support, 10" x 4"
150
- Captive stainless steel nuts allow for custom attachment methods to the support base including easy attachment of stainless steel strut, threaded rod or other project-specific hardware
- Foam bottom offers low abrasion interface for better roof membrane protection
- Compatible with roof surfaces including single ply, bituminous, metal and spray foam
- Provides superior load distribution, even with varying rooftop surfaces
- Multiple sizes and load ratings offer the ability to tailor the solution to the application
- Includes square holes for creating an H-Frame with a 12" (305 mm) cross support (PBU16 only)
- Base is manufactured from UV-stabilized thermoplastic material
- Captive stainless steel nuts allow for custom attachment methods to the support base including easy attachment of stainless steel strut, threaded rod or other project-specific hardware
- Foam bottom offers low abrasion interface for better roof membrane protection
- Compatible with roof surfaces including single ply, bituminous, metal and spray foam
- Provides superior load distribution, even with varying rooftop surfaces
- Multiple sizes and load ratings offer the ability to tailor the solution to the application
- Includes square holes for creating an H-Frame with a 12" (305 mm) cross support (PBU16 only)
- Base is manufactured from UV-stabilized thermoplastic material
- UPC
- 782856846451
- UNSPSC
- 30151609
- Country of Origin
- US
- Material:
- Polyethylene, Polypropylene, Stainless Steel 18-8 (EN 1.4305)
- Type:
- nVent CADDY Pyramid Rooftop Systems
- Height (Imperial) <Nom>:
- 4 in
- Length:
- 12-1/2 in
- Material:
- Polyethylene, Polypropylene, Stainless Steel 18-8 (EN 1.4305)
- Number Of Holes:
- 2
- Static Load (lb):
- 1 lb
- Sub Brand:
- CADDY
- Thickness:
- 4"
- Type:
- nVent CADDY Pyramid Rooftop Systems
- Width:
- 8 in
- Width (Imperial) <Nom>:
- 8 in
nVent CADDY Pyramid Universal Support, 10" x 4"
manufacturer discounts
learn about discounts
- $32.99 for $1,300.00+
- $31.21 for $2,000.00+
- $29.94 for $3,000.00+
$36.79 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$312.65 / EA
manufacturer discounts
learn about discounts
- $280.31 for $1,300.00+
- $265.22 for $2,000.00+
- $254.44 for $3,000.00+
In stock (0)
Lead time: over 7 days
may be longer on small orders
Rooftop Pyramid H-Frame Kit, Rubber
Rooftop Pyramid H-Frame Kit, Rubber
150
- Foam or rubber bottom offers low abrasion interface for better roof membrane protection
- Compatible with roof surfaces including single ply, bituminous, metal and spray foam
- Provides superior load distribution, even with varying rooftop surfaces
- Rubber rooftop interface ideal for solar panel array installations
- Kit includes 2 post bases with pre-installed mounting hardware, 6 bolts, 6 strut nuts, and 2 L-brackets to complete H-frame
- Hot-dip galvanized and UV stabilized for long lasting performance
- Accepts standard strut channels
- Foam or rubber bottom offers low abrasion interface for better roof membrane protection
- Compatible with roof surfaces including single ply, bituminous, metal and spray foam
- Provides superior load distribution, even with varying rooftop surfaces
- Rubber rooftop interface ideal for solar panel array installations
- Kit includes 2 post bases with pre-installed mounting hardware, 6 bolts, 6 strut nuts, and 2 L-brackets to complete H-frame
- Hot-dip galvanized and UV stabilized for long lasting performance
- Accepts standard strut channels
- UPC
- 782856845317
- UNSPSC
- 30151609
- Country of Origin
- US
- Material:
- Polypropylene, Polyethylene
- Size:
- 287 in²
- Type:
- nVent CADDY Pyramid H-Frame
- Consist Of 1:
- 2 post bases with pre-installed mounting hardware
- Consist Of 2:
- 6 bolts
- Consist Of 3:
- 6 strut nuts
- Consist Of 4:
- 2 L-brackets to complete H-frame
- Height (Imperial) <Nom>:
- 4.660 in
- Length (imperial) <Nom>:
- 12 3/8 in
- Material:
- Polypropylene, Polyethylene
- Size:
- 287 in²
- Static Load (lb):
- 1500 lb
- Sub Brand:
- CADDY
- Type:
- nVent CADDY Pyramid H-Frame
- Width (Imperial) <Nom>:
- 12 3/8 in
Rooftop Pyramid H-Frame Kit, Rubber
manufacturer discounts
learn about discounts
- $280.31 for $1,300.00+
- $265.22 for $2,000.00+
- $254.44 for $3,000.00+
$312.65 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
$379.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders
9-1/4" to 16-1/4" Retrofit Roof Flashing - Our Chimney Roof Flashing makes tough applications easier.9-1/4" to 16-1/4" Retrofit Roof Flashing features include: Chimney roof flashing is designed for applications where continuous pipes or obstructions prevent the use of standard flashings Easily installed by wrapping around existing pipe amp; fastening down onto roof deck The Pliable Cone amp; Stainless Steel closure can easily be trimmed to the exact diameter of pipe to be flashed Unique Stainle...
9-1/4" to 16-1/4" Retrofit Roof Flashing - Our Chimney Roof Flashing makes tough applications easier.9-1/4" to 16-1/4" Retrofit Roof Flashing features include: Chimney roof flashing is designed for applications where continuous pipes or obstructions prevent the use of standard flashings Easily installed by wrapping around existing pipe amp; fastening down onto roof deck The Pliable Cone amp; Stainless Steel closure can easily be trimmed to the exact diameter of pipe to be flashed Unique Stainless Steel roof flashing closure effectively resists corrosion amp; provides a positive weatherproof seal Corrosion-Resistant Aluminum Base can be easily shaped to conform to most roof profiles Made of flexible, weatherproof E.P.D.M. rubber Insulates the pipe from building movement caused by expansion, contraction, amp; vibration -30deg;F to 250deg;F continuous service temperature range Pipe diameter markings on the flexible cone in inches amp; millimeters Order Qty of 1 = 1 Piece Spec Sheetnbsp;Below is more info on our 9-1/4" to 16-1/4" Retrofit Roof Flashing
150
- Retrofit Roof Flashing - Our Chimney Roof Flashing makes tough applications easier
- Chimney roof flashing is designed for applications where continuous pipes or obstructions prevent the use of standard flashings
- Easily installed by wrapping around existing pipe & fastening down onto roof deck
- The Pliable Cone & Stainless Steel closure can easily be trimmed to the exact diameter of pipe to be flashed
- Unique Stainless Steel roof flashing closure effectively resists corrosion & provides a positive weatherproof seal
- Made of flexible, weatherproof E.P.D.M. rubber
- Retrofit Roof Flashing - Our Chimney Roof Flashing makes tough applications easier
- Chimney roof flashing is designed for applications where continuous pipes or obstructions prevent the use of standard flashings
- Easily installed by wrapping around existing pipe & fastening down onto roof deck
- The Pliable Cone & Stainless Steel closure can easily be trimmed to the exact diameter of pipe to be flashed
- Unique Stainless Steel roof flashing closure effectively resists corrosion & provides a positive weatherproof seal
- Made of flexible, weatherproof E.P.D.M. rubber
- UPC
- 750405147533
- UNSPSC
- 30151602
- Country of Origin
- US
- Base Length:
- 21-1/2"
- Base Width:
- 21-1/2"
- Outside Diamete of Pipe to be Flashed:
- 9-1/4" to 16-1/4"
- Pipe Size Range:
- 9-1/4" to 16-1/4"
- Product Length:
- 21-1/2"
- Product Width:
- 21-1/2"
9-1/4" to 16-1/4" Retrofit Roof Flashing - Our Chimney Roof Flashing makes tough applications easier.9-1/4" to 16-1/4" Retrofit Roof Flashing features include: Chimney roof flashing is designed for a...
$379.50 / EA
In stock (0)
Lead time: over 7 days
may be longer on small orders