3M™ Fire Barrier RC-1 Restricting Collar works with our 3M™ Fire Barrier Wrap Strip FS-195+ or Ultra GS firestops for through penetrations in wall, floor and floor/ceiling assemblies. Durable 28-gauge steel collar is easily cut to fit the pipe diameter. The collar secures the firestop and provides tabs for anchoring to walls or floor slabs, helping ensure stability for effective firestops.

3M™ Fire Barrier RC-1 Restricting Collar works with our 3M™ Fire Barrier Wrap Strip FS-195+ or Ultra GS firestops for through penetrations in wall, floor and floor/ceiling assemblies. Durable 28-gauge steel collar is easily cut to fit the pipe diameter. The collar secures the firestop and provides tabs for anchoring to walls or floor slabs, helping ensure stability for effective firestops. read less

A Small but Vital Part of an Effective Firestop SystemWith its small but critical design features, 3...150 read more

A Small but Vital Part of an Effective Firestop SystemWith its small but critical design features, 3M™ Fire Barrier RC-1 Restricting Collar is integral to successful intumescent firestop installation around penetrations in wall, floor and floor/ceiling assemblies. Quite simply, it’s a crucial component for ensuring that elastomeric and hard char firestop material will properly close openings left by burned non-metallic pipes and other penetrations. In fact, the use of such a collar is required for firestopping plastic pipes larger than 4 (101.6 mm) in diameter. The Fire Barrier RC-1 is ideal for use in conjunction with 3M™ Fire Barrier Wrap Strip FS-195+ or 3M™ Fire Barrier Ultra GS firestops.Recommended ApplicationsUL-classified for use on PVC, CPVC, ABS, CCPVC, CCABS, PVDF, PP and PB plastic pipeIn conjunction with 3M™ Fire Barrier Wrap Strip FS-195+In conjunction with 3M™ Fire Barrier Ultra GSThe Basis for Durable FirestopsDurable 28-gauge steel is thin enough for installers to easily unroll and cut to size around the installed firestop. It is quickly secured into place with a hose clamp or steel tie wire. Notches in its outer edge of the RC-1 Restricting Collar form bendable tabs – installers simply bend them into place and use hardware such as masonry fasteners (sold separately) to anchor them to the floor or ceiling slab. The result is a permanent, fixed firestop that also contributes to the structural stability of the penetration.The Science of Better Fire Protection from 3MSince 1925 when a lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each adhesive, sealant, and protective coating, along with the best ways to use them – including 3M™ Fire Barrier RC-1 Restricting Collar – to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less

Our 3M™ Fire Barrier Plastic Pipe Device is designed for 6" non-metallic pipe in new and retrofit through penetration installations. This one-piece metal collar assembly is designed to fit smoothly around the pipe with no assembly required, and provides anchor tabs for stability. It is firestop tested up to 2 hours in tested and listed systems.

Our 3M™ Fire Barrier Plastic Pipe Device is designed for 6" non-metallic pipe in new and retrofit through penetration installations. This one-piece metal collar assembly is designed to fit smoothly around the pipe with no assembly required, and provides anchor tabs for stability. It is firestop tested up to 2 hours in tested and listed systems. read less

A Quick Fit for Durable Firestop ProtectionIncorporates 3M™ Fire Barrier Wrap Strip FS-195+ and is s...150 read more

A Quick Fit for Durable Firestop ProtectionIncorporates 3M™ Fire Barrier Wrap Strip FS-195+ and is specifically designed to be a firestop for non-metalic, 6 pipe penetrations. This one-piece metal collar is built to fit securely around the firestop wrap strips – no additional assembly is required. Tested for up to 2 hours of fire protection in tested and listed systems, the device holds firestop material in place and helps ensure proper closure during fire. Metal tabs make for fast, easy anchoring to wall or floor slabs with common tools and hardware such as toggle bolts for gypsum or masonry anchors for concrete. (Hardware sold separately.) The result is a permanent, fixed firestop that also contributes to the structural stability of the penetration.Recommended ApplicationsFor installing firestop around 6" non-metallic pipe in new and retrofit through penetration installationsIn conjunction with 3M™ Fire Barrier Wrap Strip FS-195+The Science of Better Fire Protection from 3MSince 1925 when one a lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each 3M adhesive, sealant, protective coating, along with the best ways to use them – including 3M™ Fire Barrier Plastic Pipe Device – to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less

Our 3M™ Fire Barrier Pass-Through Device Foam Plugs are designed for closing 3M™ Fire Barrier Pass-Through Devices which are used in wall and floor through-penetrations. They are simple to use and help reduce sound and smoke transmission. During a fire, this product, used in conjunction with a 3M™ Fire Barrier Pass-Through Device, helps maintain a tight seal against smoke.

Our 3M™ Fire Barrier Pass-Through Device Foam Plugs are designed for closing 3M™ Fire Barrier Pass-Through Devices which are used in wall and floor through-penetrations. They are simple to use and help reduce sound and smoke transmission. During a fire, this product, used in conjunction with a 3M™ Fire Barrier Pass-Through Device, helps maintain a tight seal against smoke. read less

Enhanced Seal for Fire PreventionEngineered to help stop smoke and sound, 3M™ Fire Barrier Pass-Thro...150 read more

Enhanced Seal for Fire PreventionEngineered to help stop smoke and sound, 3M™ Fire Barrier Pass-Through Device Foam Plugs are replacement foam plugs designed for firestop applications in walls and floors. These are re-enterable and reusable. Installation is easy, saving both time and labor.Recommended ApplicationsSeal ends of 3M™ Fire Barrier Pass-Through DevicesReliable and Affordable Fire ProtectionEffective and easy to install, 3M™ Fire Barrier Pass-Through Device Foam Plugs are part of 3M’s family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

Our 3M™ Fire Barrier Ultra GS Wrap Strip is a quick, cost-effective firestop for non-metallic pipe, insulated pipe and combo penetrations in fire-rated wall, floor and floor/ceiling assemblies. This graphite-based intumescent firestop blocks flame, heat and toxic by-products of combustion. Rolled strip is easily cut to size and the flexible material conforms even to irregular-shaped penetrations.

Our 3M™ Fire Barrier Ultra GS Wrap Strip is a quick, cost-effective firestop for non-metallic pipe, insulated pipe and combo penetrations in fire-rated wall, floor and floor/ceiling assemblies. This graphite-based intumescent firestop blocks flame, heat and toxic by-products of combustion. Rolled strip is easily cut to size and the flexible material conforms even to irregular-shaped penetrations. read less

Expanding Firestop Material for Non-Metallic Pipe PenetrationsEngineered specifically as a firestop...150 read more

Expanding Firestop Material for Non-Metallic Pipe PenetrationsEngineered specifically as a firestop suitable for plastic and other non-metallic pipe penetration systems, 3M™ Fire Barrier Ultra GS Wrap Strip is fire-rated up to 4 hours in tested and listed systems and meets ASTM E814 (UL 1479) performance standards for exposure to flame, heat and water. It features a largely inorganic intumescent graphite-based construction that expands when heated to deliver excellent thermal insulation and prevent heat transfer, as well as provide an effective firestop for non-metallic penetrants.Recommended ApplicationsFirestops ccPVC, PVC, CPVC, FRPP, PVDF, ccABS and ABS pipes penetrating 1- and 2-hour fire-rated gypsum wallboard assembliesThrough-penetration systems in up to 3-hour fire-rated concrete walls and floorsInsulated HVAC penetration systemsDrain, waste, vent or closed pipe systemsIn conjunction with 3M™ Fire Barrier Composite Sheet CS-195+ for large openingsUse with the 3M™ Fire Barrier RC-1 Restricting CollarA Firestop that Keeps Saving3M™ Fire Barrier Ultra GS Wrap Strip firestop material is very versatile and flexible: installers simply roll it out and cut as much material as required using common tools. The conformable material wraps easily around the penetrant, saving time and labor. It is designed for excellent weatherability against temperature and humidity, and is re-enterable to save added time and material costs after installation.The Science of Better Fire Protection from 3MSince 1925 when one of a lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each adhesive, sealant and protective coating including 3M™ Fire Barrier Ultra GS Wrap Strip – to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less

3M™ Fire Barrier Composite Sheet CS-195+ is a lightweight intumescent firestop that combines four components into a single system to help slow the spread of fire, smoke and noxious gases. Sheets combine 28-gauge steel, intumescent material, wire mesh and aluminum foil and are easy to handle and install with common trade tools. They are firestop tested for up to 4 hours of fire protection.

3M™ Fire Barrier Composite Sheet CS-195+ is a lightweight intumescent firestop that combines four components into a single system to help slow the spread of fire, smoke and noxious gases. Sheets combine 28-gauge steel, intumescent material, wire mesh and aluminum foil and are easy to handle and install with common trade tools. They are firestop tested for up to 4 hours of fire protection. read less

Firestopping in Nearly Any Size and ShapeFor larger openings and penetrations where putties and stri...150 read more

Firestopping in Nearly Any Size and ShapeFor larger openings and penetrations where putties and strips alone aren’t enough, 3M™ Fire Barrier Composite Sheet CS-195+ is a one-part firestop system that installers can cut and form to exact sizes – no mixing or damming required. These sheets are easily installed using common tools and fasteners. Ideal for firestopping penetrations such as cable trays and conduit, the sheets feature intumescent material bonded to 28-gauge galvanized steel, reinforced on its facing side with hexagonal wire mesh and covered in aluminum foil. This combination of organic/inorganic materials makes these composite sheets a reliable firestop in tested and listed systems, new and retrofit. These materials also make an excellent thermal conductor, helping to dispel built-up radiant heat to preserve process and control equipment and help minimize cable derating concerns.Recommended Applications Seal penetrations through fire-rated walls and floors Firestop penetrations including cable trays, cable, piping and large blanks Multiple component installations where heat build-up and derating are concerns Shield conduit, HVAC ductwork, panels, valves and vital heat-sensitive process equipment Fire-resistive and smoke seal for any shape opening in concrete block or slabs Protect cable drop-outs, junction boxes and cabinets Intermittent firestop in horizontal and vertical cable tray runs In conjunction with 3M™ Fire Barrier Sealant or Moldable Putty MP+Fully Tested and Approved3M™ Fire Barrier Composite Sheet CS-195+ is firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479).The Science of Better Fire Protection from 3MSince 1925 when a 3M lab assistant invented masking tape, 3M has been applying science to life –developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each adhesive, sealant, protective coating, device and firestop product including 3M™ Fire Barrier Composite Sheet CS-195+ to improve performance, and to help businesses like yours operate faster, better and more efficiently. read less

3M™ Fire Barrier Pillows are self-contained, intumescent products designed for use in through-penetration firestops, providing up to 3 hours of protection. This fire barrier pillow expands to form a hard char that tightly seals against flame spread, smoke and toxic gases. We also engineered this product to be re-enterable and re-useable for new or retrofit installations.

3M™ Fire Barrier Pillows are self-contained, intumescent products designed for use in through-penetration firestops, providing up to 3 hours of protection. This fire barrier pillow expands to form a hard char that tightly seals against flame spread, smoke and toxic gases. We also engineered this product to be re-enterable and re-useable for new or retrofit installations. read less

Designed for Fire Protection and PreventionOffering up to 3 hours of protection, 3M™ Fire Barr...150 read more

Designed for Fire Protection and PreventionOffering up to 3 hours of protection, 3M™ Fire Barrier Pillows are self-contained, intumescent products designed for use in through-penetration firestops, such as cable trays, conduit and blank openings. During a fire, 3M™ Fire Barrier Pillows intumesce (expand) and lock themselves into place, surrounding the penetrant(s) to help prevent the spread of smoke, fire and toxic gases. These fire pillows are easy to install and do not require mesh wire. They are ideal for projects requiring re-enterability of a firestop system, simply remove and replace pillows as needed. 3M designed this product with graphite-free composition, which does not conduct electricity. Additionally, these fire protection pillows have excellent aging properties, providing long-lasting durability and performance.Recommended Applications3M™ Fire Barrier Pillows achieve fire resistance for up to 3 hours and are used for through-penetration firestop applications such as: Cable trays Conduit openings Blank openingsTop-Quality Fire Stop3M™ Fire Barrier Pillows are a part of our comprehensive line of top-quality fire stop and fire prevention products. 3M has proven to be a leader in fire protection products, which are used around the world to help protect people, equipment and buildings. Using science and innovation, 3M helps limit the devastating effects of fire with products like 3M™ Fire Barrier Pillows. Enjoy the confidence and security that comes from a product that has exceptional and proven fire protection performance. read less

Our 3M™ Fire Barrier Pass-Through Device Foam Plugs are designed for closing 3M™ Fire Barrier Pass-Through Devices which are used in wall and floor through-penetrations. They are simple to use and help reduce sound and smoke transmission. During a fire, this product, used in conjunction with a 3M™ Fire Barrier Pass-Through Device, helps maintain a tight seal against smoke.

Our 3M™ Fire Barrier Pass-Through Device Foam Plugs are designed for closing 3M™ Fire Barrier Pass-Through Devices which are used in wall and floor through-penetrations. They are simple to use and help reduce sound and smoke transmission. During a fire, this product, used in conjunction with a 3M™ Fire Barrier Pass-Through Device, helps maintain a tight seal against smoke. read less

Enhanced Seal for Fire PreventionEngineered to help stop smoke and sound, 3M™ Fire Barrier Pass-Thro...150 read more

Enhanced Seal for Fire PreventionEngineered to help stop smoke and sound, 3M™ Fire Barrier Pass-Through Device Foam Plugs are replacement foam plugs designed for firestop applications in walls and floors. These are re-enterable and reusable. Installation is easy, saving both time and labor.Recommended ApplicationsSeal ends of 3M™ Fire Barrier Pass-Through DevicesReliable and Affordable Fire ProtectionEffective and easy to install, 3M™ Fire Barrier Pass-Through Device Foam Plugs are part of 3M’s family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less

Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall perimeter joints and through penetration seals to control the transmission of fire, heat, smoke and noxious gas. This water-based firestop sealer is applied with conventional airless sprayers, dries quickly and cleans up easily.

Our 3M™ FireDam™ Spray 200 is a sprayable material that dries to form a tough, elastomeric coating. It will firestop building joints, curtain wall perimeter joints and through penetration seals to control the transmission of fire, heat, smoke and noxious gas. This water-based firestop sealer is applied with conventional airless sprayers, dries quickly and cleans up easily. read less

Effective Fire Protection in a Flexible, Durable CoatingFormulated for flexibility that stays where...150 read more

Effective Fire Protection in a Flexible, Durable CoatingFormulated for flexibility that stays where it’s sprayed, 3M™ FireDam™ Spray 200 controls the transmission of fire, heat, smoke and noxious gasses before, during and after exposure to fire. It provides up to 4-hour fire protection in construction joints per ASTM E 1966 (UL 2079) and up to 2-hour protection for through penetration systems per ASTM E 814 (UL 1479) & CAN/ULC-S115. It also provides up to 3-hour fire protection in perimeter fire barrier systems (curtain walls) in accordance with ASTM E 2307. This firestop coating is Ideal for sealing building joints, penetration seals and perimeter joints between fire-rated floors and fire-rated walls. It also minimizes noise transfer (STC Rating of 56 when tested in a STC 56-rated wall assembly).This elastomeric coating forms a durable, flexible seal with up to +/- 50% compression/extension of nominal joint width without cracking. It resists sag for vertical applications, and displays excellent hiding power which makes it easier for technicians to maintain the proper coating thickness.Recommended Applications Floor to floor joints Perimeter joints (curtain walls) Head-of-wall jointsEasy Spray-On Fire ProtectionThe water-based, easy-cleanup 3M™ FireDam™ Spray 200 is applied using conventional airless sprayers. Applied as a 1/8” (3mm) coating, it dries quickly to a uniform seal in a variety of conditions. It is also freeze and thaw resistant, helping to ensure consistent firestop in a range of conditions during construction. 3M™ FireDam™ Spray 200 is available in a distinct red for easy identification, or a dark gray to match existing surroundings.Reliable and Affordable Fire ProtectionEffective and easy to install, 3M™ FireDam™ Spray 200 is part of 3M's family of fire protection products that offer the broadest, long-lasting solutions for a variety of commercial, industrial and residential applications. As a trusted leader in the fire protection industry, 3M offers a broad line of affordable products designed to meet the most demanding firestop requirements. Find the solution you need from the industry-preferred line of fire protection products. read less