3M™ Wire Pulling Lubricant Wintergrade WLW is a translucent, green polymer gel that acts as an excellent lubricant for pulling wire and cable. This lubricant wipes off the cable quickly and cleanly before terminating or splicing. It is a modified version of our WL gel lubricant for cold weather applications.

3M™ Wire Pulling Lubricant Wintergrade WLW is a translucent, green polymer gel that acts as an excellent lubricant for pulling wire and cable. This lubricant wipes off the cable quickly and cleanly before terminating or splicing. It is a modified version of our WL gel lubricant for cold weather applications. read less

3M™ Wire Pulling Lubricant Wintergrade WLW is non staining for a quick and easy cleanup. This lubric...150 read more

3M™ Wire Pulling Lubricant Wintergrade WLW is non staining for a quick and easy cleanup. This lubricant gel withstands a wide temperature range of 10 to 110 degrees F (-12 to 43 degrees C). The thick gel is easy to apply onto cables without runs, drips or residue. CSA Certified and RoHS 2011/65/EU Compliant. read less

Yellow 77 Plus Lubricant, Size: 1 GAL, Container: Pail, Specific Gravity: 0.93, Plastic Safe: Yes, Slight Odor, Voc: 2.6 GPL (As Packaged, Minus Water), Working Temperature: 40 - 100 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Less Than 90 PCT, Percent Solid By Weight: Approximately 15 PCT, Yellow Creamy Paste, 6.5 - 7.5 pH, Solubility In Water: Moderate, Storage Temperature: 32 - 190 DEG F, Ul Listed, For Wire Pulling

Yellow 77 Plus Lubricant, Size: 1 GAL, Container: Pail, Specific Gravity: 0.93, Plastic Safe: Yes, Slight Odor, Voc: 2.6 GPL (As Packaged, Minus Water), Working Temperature: 40 - 100 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Less Than 90 PCT, Percent Solid By Weight: Approximately 15 PCT, Yellow Creamy Paste, 6.5 - 7.5 pH, Solubility In Water: Moderate, Storage Temperature: 32 - 190 DEG F, Ul Listed, For Wire Pulling read less

IDEAL Yellow 77® Plus Wire pulling lubricant is a wax-based formula offering superior lubricity due...150 read more

IDEAL Yellow 77® Plus Wire pulling lubricant is a wax-based formula offering superior lubricity due to the Rapid Glide™ polytetrafluoroethylene additive — great for tough pulls. It is safe to use with all cable types. It won't break down/separate after repeated exposure to freezing temperatures and dries to a thin, non-conductive film that won't clog conduit. Yellow 77® Plus has a creamy texture and clings to cable throughout long pulls. Apply conveniently and uniformly by hand or brush. It is a homogeneous blend that requires no mixing and forms surface coat to control evaporation, so it won't dry out. It is environmentally safe, non-toxic, non-flammable and non-corrosive for user safety. Lubricant remains stable in high temperature from 32°F to 190°F (0°C to 88°C). It comes in 1 qt squeeze bottle, 1-gallon bucket, and 5-gallon bucket. Lubricant is UL listed. read less

OIL (50041355)

OIL (50041355) read less

150

read less

3M™ Clear Wire Pulling Lubricant WLC is a clear water-based gel that acts as an excellent lubricant for pulling electrical and communication cable. This easy to apply gel dries off slowly on cables. The lubricant produces low coefficient of friction to reduce the chance of cable damage from high pulling forces.

3M™ Clear Wire Pulling Lubricant WLC is a clear water-based gel that acts as an excellent lubricant for pulling electrical and communication cable. This easy to apply gel dries off slowly on cables. The lubricant produces low coefficient of friction to reduce the chance of cable damage from high pulling forces. read less

3M™ Clear Wire Pulling Lubricant WLC is a consistent gel that does not liquefy, or separate with hot...150 read more

3M™ Clear Wire Pulling Lubricant WLC is a consistent gel that does not liquefy, or separate with hot or cold aging. It stays thick, smooth and ready to apply. Temperature range of 20 to 120 degrees F (-6.7 to 49 degrees C). C UL Listed and RoHS 2011/65/EU Compliant. read less

3M™ Wire Pulling Lubricant Wintergrade WLW is a translucent, green polymer gel that acts as an excellent lubricant for pulling wire and cable. This lubricant wipes off the cable quickly and cleanly before terminating or splicing. It is a modified version of our WL gel lubricant for cold weather applications.

3M™ Wire Pulling Lubricant Wintergrade WLW is a translucent, green polymer gel that acts as an excellent lubricant for pulling wire and cable. This lubricant wipes off the cable quickly and cleanly before terminating or splicing. It is a modified version of our WL gel lubricant for cold weather applications. read less

3M™ Wire Pulling Lubricant Wintergrade WLW is non staining for a quick and easy cleanup. This lubric...150 read more

3M™ Wire Pulling Lubricant Wintergrade WLW is non staining for a quick and easy cleanup. This lubricant gel withstands a wide temperature range of 10 to 110 degrees F (-12 to 43 degrees C). The thick gel is easy to apply onto cables without runs, drips or residue. CSA Certified and RoHS 2011/65/EU Compliant. read less

Cable-Gel™ Cable Pulling Lubricant One (1) Gallon. Polymer-based, no silicon lubricant offers lower friction and easier pulling. Compatible with all cable insulation types. Cleans up quickly. Non-staining. Higher lubricity than competitive products. Will not cement itself to the pipe. Dries slowly. Can be applied by hand or pump. Will not break down or separate after exposure to heat or cold. Environmentally safe/non-hazardous.

Cable-Gel™ Cable Pulling Lubricant One (1) Gallon. Polymer-based, no silicon lubricant offers lower friction and easier pulling. Compatible with all cable insulation types. Cleans up quickly. Non-staining. Higher lubricity than competitive products. Will not cement itself to the pipe. Dries slowly. Can be applied by hand or pump. Will not break down or separate after exposure to heat or cold. Environmentally safe/non-hazardous. read less

150

read less

Aqua-Gel CW Lubricant, Size: 1 GAL, Container: Jug, Specific Gravity: 1.10, Plastic Safe: Yes, Mild Odor, Voc: 4.1 GPL (As Packaged, Minus Water), Working Temperature: -28 To 40 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Less Than 45 PCT, Percent Solid By Weight: Approximately 60 PCT, Pink Gel, 7.5 - 8.5 pH, Solubility In Water: Infinite, Storage Temperature: -28 To 190 DEG F, For Cable Pulling

Aqua-Gel CW Lubricant, Size: 1 GAL, Container: Jug, Specific Gravity: 1.10, Plastic Safe: Yes, Mild Odor, Voc: 4.1 GPL (As Packaged, Minus Water), Working Temperature: -28 To 40 DEG F, Boiling Point: 212 DEG F (100 DEG C), Percent Volatile By Volume: Less Than 45 PCT, Percent Solid By Weight: Approximately 60 PCT, Pink Gel, 7.5 - 8.5 pH, Solubility In Water: Infinite, Storage Temperature: -28 To 190 DEG F, For Cable Pulling read less

IDEAL Aqua-Gel® CW non-toxic cable pulling lubricant features the same excellent qualities as IDEAL...150 read more

IDEAL Aqua-Gel® CW non-toxic cable pulling lubricant features the same excellent qualities as IDEAL Aqua-Gel® II, but with a lower temperature range for exterior use in cold weather conditions. It is polymer-based formula with a clear orange color that offers maximum tension reduction in high-stress electrical and communications cable-pulling operations. Clings to cable throughout long pulls and is well-suited for hand or poured applications. Lubricant dries to a semi-fluid film that won't clog conduit, and cleans up easily with soap/water. It remains temperature stable over a wide temperature range from-28°F to 190°F (-33°C to 88°C). It is acceptable with all cable types except composite rubber, and clings to cable throughout long pulls. It comes in a 1-quart squeeze bottle, 1-gallon bucket, and 5-gallon bucket. It is environmentally safe, non-toxic, non-flammable and non-corrosive for convenient use. For outdoor use only. read less

Advanced formula, light yellow cream makes pulling faster and easier. Compatible with all cable insulation types. Dries slowly to a thin, non-conductive, non-hardening residue. Adheres well to the cable without messy dripping. Reduces waste. Cleans up easily. Non-staining. Won't break down or separate after exposure to freezing cold or blistering heat. Environmentally safe/non-hazardous.

Advanced formula, light yellow cream makes pulling faster and easier. Compatible with all cable insulation types. Dries slowly to a thin, non-conductive, non-hardening residue. Adheres well to the cable without messy dripping. Reduces waste. Cleans up easily. Non-staining. Won't break down or separate after exposure to freezing cold or blistering heat. Environmentally safe/non-hazardous. read less

150

read less