Results: 0 products, 0 Pages
Filtering by Category Manufacturers

645-3

CUTTER, CARBIDE (3")
Manufacturer: GREENLEE TEXTRON
GRN 645-3 CUTTER, CARBIDE (3")
manufacturer discounts
$500.00 - $68.04 each
$1,000.00 - $64.80 each
$2,000.00 - $62.64 each

$ 78.30 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Quick Change Carbide Tipped Hole Cutter 3" (76.2 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".
MPN: 
645-3
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Carbide tipped hole cutter
Application
Stainless steel, mild steel, aluminum, copper, brass, fiberglass and plastics
Brand Name
Greenlee
Chuck Size
3/8 IN
Cutting Edge
Tungsten Carbide Teeth
Hole Size
3" (76.2 mm) for 2-1/2" conduit
Material
Carbide Tip
Maximum Cutting Depth
8 ga
Pilot Drill
Replacement 645-002 sold separately
Pilot Drill Size
5/16" x 2-3/4" (8 mm x 69 mm)
Shank Size
645-022 arbor sold separately (1/2" shank)
Size
3.000 IN
Special Features
Switch quickly between cutter sizes without re-chucking, with a simple push and turn connection. Split-Point Cobalt Steel Pilot Drill with step design – for fast, accurate cutting with less force. Tungsten Carbide Teeth – optimized design for fast, easy cutting and maximum life in stainless steel – no oil required. Flange Stop – eliminates over-drilling. Slug Ejector Spring – quick, easy slug removal Cuts round, burr-free holes
Type
Carbide-Tipped Hole Cutter
Unspsc
23241638
GTIN-14: 
00783310057079
UPC: 
783310057079
UNSPSC: 
23241638
Height: 
1.6000 IN
Width: 
4.6000 IN
Length: 
6.7000 IN
Gross Weight: 
0.650 L
Country of Origin: 
CN
Spec Sheet
View Specification Sheet
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-57-0251

CUTTER 1/2 IN STEEL HAWG
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 49-57-0251 CUTTER 1/2 IN STEEL

manufacturer discounts
$1,250.00 - $59.65 each
$2,000.00 - $57.17 each
0 - $57.17 each

$ 67.11 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Steel Hawg Arbor with No. 3 Morse Taper shank for use in Milwaukee Magnetic Drill Motors 4292-1 or 4297-1. This Arbor adapts Threaded Steel Hawg Cutters to a No. 3 Internal Morse Taper Motor. For best cutting results use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately to distribute cutting fluid during drilling. Bullets: Arbor assembly for threaded shank Steel Hawg Cutters Metric thread size M18 x 1.5 Consists of arbor, oil hose and hand pump 01167
MPN: 
49-57-0251
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Solid milling cutter
Brand Name
Milwaukee
GTIN-14: 
00045242201167
UPC: 
045242201167
UNSPSC: 
23241614
Height: 
3.2500 IN
Width: 
1.5000 IN
Length: 
1.5000 IN
Gross Weight: 
0.240 L
Country of Origin: 
JPN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-57-0564

CUTTER 9/16 IN STEEL HAWG
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 49-57-0564 CUTTER 9/16 IN STEE

manufacturer discounts
$1,250.00 - $59.65 each
$2,000.00 - $57.17 each
0 - $57.17 each

$ 67.11 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 9/16" Quick Change Tang Drive Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 1" hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without prepunching or pilot holes.The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press. Bullets: Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut Quick change tang drive: Fast change-outs let you work more efficiently 01211
MPN: 
49-57-0564
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Solid milling cutter
Brand Name
Milwaukee
GTIN-14: 
00045242201211
UPC: 
045242201211
UNSPSC: 
23241614
Height: 
3.0000 IN
Width: 
1.5000 IN
Length: 
1.5000 IN
Gross Weight: 
0.240 L
Country of Origin: 
JPN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-57-0626

CUTTER 5/8 IN STEEL HAWG
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 49-57-0626 CUTTER 5/8 IN STEEL

manufacturer discounts
$1,250.00 - $59.65 each
$2,000.00 - $57.17 each
0 - $57.17 each

$ 67.11 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 5/8" Quick Change Tang Drive Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 1" hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without prepunching or pilot holes.The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press. Bullets: Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut Quick change tang drive: Fast change-outs let you work more efficiently 01266
MPN: 
49-57-0626
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Solid milling cutter
Brand Name
Milwaukee
GTIN-14: 
00045242201266
UPC: 
045242201266
UNSPSC: 
23241614
Height: 
3.2500 IN
Width: 
1.5000 IN
Length: 
1.5000 IN
Gross Weight: 
0.240 L
Country of Origin: 
JPN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-57-0689

CUTTER 11/16 IN STEEL HAWG
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 49-57-0689 CUTTER 11/16 IN STE

manufacturer discounts
$1,250.00 - $59.65 each
$2,000.00 - $57.17 each
0 - $57.17 each

$ 67.11 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 11/16" Quick Change Tang Drive Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 1" hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without prepunching or pilot holes.The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press. Bullets: Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut Quick change tang drive: Fast change-outs let you work more efficiently 01310
MPN: 
49-57-0689
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Solid milling cutter
Brand Name
Milwaukee
GTIN-14: 
00045242201310
UPC: 
045242201310
UNSPSC: 
23241614
Height: 
1.7000 IN
Width: 
1.7000 IN
Length: 
3.2000 IN
Gross Weight: 
0.250 L
Country of Origin: 
JPN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-57-0750

CUTTER 3/4 IN STEEL HAWG THREADED
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 49-57-0750 CUTTER 3/4 IN STEEL

manufacturer discounts
$1,250.00 - $63.68 each
$2,000.00 - $61.03 each
0 - $61.03 each

$ 71.64 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 3/4-inch Threaded Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 2" hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster.The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 for Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 for Milwaukee's 4292-1 mag press. The 3/4" bit diameter has a metric thread size of M18 x 1.5" shank. Use the Threaded Steel Hawg with a No. 3 Morse Taper Arbor Assembly 49-57-0010. Bullets: Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut Accurate cuts: Spring-loaded, self-ejecting pin doubles as a centering pin and permits faster plug removal 01358
MPN: 
49-57-0750
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Solid milling cutter
Brand Name
Milwaukee
GTIN-14: 
00045242201358
UPC: 
045242201358
UNSPSC: 
23241614
Height: 
4.1900 IN
Width: 
1.6300 IN
Length: 
1.5700 IN
Gross Weight: 
0.230 L
Country of Origin: 
JPN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-57-0752

CUTTER 3/4 IN STEEL HAWG QUICK CHANGE
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 49-57-0752 CUTTER 3/4 IN STEEL

manufacturer discounts
$1,250.00 - $59.65 each
$2,000.00 - $57.17 each
0 - $57.17 each

$ 67.11 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 3/4" Quick Change Tang Drive Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 1" hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without prepunching or pilot holes. The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press. Bullets: Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut Quick change tang drive: Fast change-outs let you work more efficiently 01372
MPN: 
49-57-0752
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Solid milling cutter
Brand Name
Milwaukee
GTIN-14: 
00045242201372
UPC: 
045242201372
UNSPSC: 
23241614
Height: 
3.2000 IN
Width: 
1.5000 IN
Length: 
1.5000 IN
Gross Weight: 
0.260 L
Country of Origin: 
JPN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-57-0812

CUTTER 13/16 IN STEEL HAWG THREADED
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 49-57-0812 CUTTER 13/16 IN STE

manufacturer discounts
$1,250.00 - $68.59 each
$2,000.00 - $65.73 each
0 - $65.73 each

$ 77.17 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 13/16" Threaded Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 2" hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster.The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 13/16" bit diameter has a metric thread size of M18 x 1.5" shank. Use the Threaded Steel Hawg with a No. 3 Morse Taper Arbor Assembly 49-57-0010. Bullets: Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut Accurate cuts: Spring-loaded, self-ejecting pin doubles as a centering pin and permits faster plug removal 01457
MPN: 
49-57-0812
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Solid milling cutter
Brand Name
Milwaukee
GTIN-14: 
00045242201457
UPC: 
045242201457
UNSPSC: 
23241614
Height: 
4.1300 IN
Width: 
1.6900 IN
Length: 
1.5700 IN
Gross Weight: 
0.240 L
Country of Origin: 
JPN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-57-0814

CUTTER 13/16 IN STEEL HAWG QUICK CHANGE
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 49-57-0814 CUTTER 13/16 IN STE

manufacturer discounts
$1,250.00 - $63.25 each
$2,000.00 - $60.62 each
0 - $60.62 each

$ 71.16 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 13/16" Quick Change Tang Drive Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 1" hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without prepunching or pilot holes.The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press. Bullets: Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut Quick change tang drive: Fast change-outs let you work more efficiently 01471
MPN: 
49-57-0814
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Solid milling cutter
Brand Name
Milwaukee
GTIN-14: 
00045242201471
UPC: 
045242201471
UNSPSC: 
23241614
Height: 
3.2500 IN
Width: 
1.5000 IN
Length: 
1.5000 IN
Gross Weight: 
0.300 L
Country of Origin: 
JPN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-57-0875

CUTTER 7/8 IN STEEL HAWG THREADED
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 49-57-0875 CUTTER 7/8 IN STEEL

manufacturer discounts
$1,250.00 - $72.12 each
$2,000.00 - $69.12 each
0 - $69.12 each

$ 81.14 each

0 in stock.
Lead time: over 7 days
may be longer on small orders

Full Description:
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 7/8" Threaded Steel Hawg® Cutter. This long-lasting cutter features carbide teeth and an alternating cutting pattern to cut up to a 2" hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster.The Steel Hawg Cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 7/8" bit diameter has a metric thread size of M18 x 1.5" shank. Use the Threaded Steel Hawg with a No. 3 Morse Taper Arbor Assembly 49-57-0010. Bullets: Faster cutting: Alternating tooth form geometry makes fast work of cutting steel Long life: Abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut Accurate cuts: Spring-loaded, self-ejecting pin doubles as a centering pin and permits faster plug removal 01501
MPN: 
49-57-0875
Unspsc Family
Metal cutting machinery and accessories
Unspsc Class
Metal cutting tools
Unspsc Commodity
Solid milling cutter
Brand Name
Milwaukee
GTIN-14: 
00045242201501
UPC: 
045242201501
UNSPSC: 
23241614
Height: 
4.1900 IN
Width: 
1.6300 IN
Length: 
1.5700 IN
Gross Weight: 
0.240 L
Country of Origin: 
JPN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

49-57-0877

CUTTER 7/8 IN STEEL HAWG QUICK CHANGE
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
MILW 49-57-0877 CUTTER 7/8 IN STEEL

manufacturer discounts
$1,250.00 - $67.72 each
$2,000.00 - $64.89 each
0 - $64.89 each