Filtering by Category Manufacturers
AIRMASTER FAN COMPANY

4G

Washdown, SS 115V, 1/4HP Mtr.
Manufacturer: AIRMASTER FAN COMPANY
Short Description: A-M 78040 Washdown, SS 115V, 1/4HP

$757.89 each




AIRMASTER FAN COMPANY

4H

Washdown, SS 115V 1/3HP Mtr.
Manufacturer: AIRMASTER FAN COMPANY
Short Description: A-M 78042 Washdown, SS 115V 1/3HP M

$901.87 each




AIRMASTER FAN COMPANY

5B

Washdown, SS 115V 1/15HP Mtr.
Manufacturer: AIRMASTER FAN COMPANY
Short Description: A-M 78039 Washdown, SS 115V 1/15HP

$549.09 each




AIRMASTER FAN COMPANY

967-3 SP

H-D Motor, 967-3 sp. For 24" and 30"" H-D fans."
Manufacturer: AIRMASTER FAN COMPANY
Short Description: A-M 21007 H-D Motor, 967-3 sp. For

$527.91 each




Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
Heating and cooling system motor AC
Brand Name
Airmaster
Type
3 Speed Motor for Heavy Duty Oscillating Air Circulators
Application
For Standard 24 In and 30 In Oscillating Fans
Horsepower
0.333
Speed Rating
1070 High
Voltage Rating
115
Frequency Rating
60
Full Load Current
2.9
Phase
1
Enclosure
Totally Enclosed
Insulation Class
B
Service Factor
1
Rotation
Clockwise
Base
Bolt
Shaft Size
5/8 In
GTIN-14: 
00783429210075
UPC: 
783429210075
UNSPSC: 
26101105
Country of Origin: 
CN
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

NU 695RB

Finish Pack. Fan Motor/Grille Assembly. 70 CFM, 6.0 Sones. Uses 690RA housing pack.
Manufacturer: BROAN-NUTONE LLC
Short Description: NUTONE 695RB Finish Pack. Fan Motor

$31.62 each




Full Description:
Finish Pack. Fan Motor/Grille Assembly. 70 CFM, 6.0 Sones. Uses 690RA housing pack.
Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
General purpose motor AC
Brand Name
Broan
Type
Fan Motor/Grille Assembly
Special Features
70 Cfm 60 Sones Finish Pack
GTIN-14: 
00784891254536
UPC: 
784891254536
UNSPSC: 
26101112
Height: 
0.9688 IN
Width: 
1.1354 IN
Length: 
1.3229 IN
Gross Weight: 
16.200 L
Country of Origin: 
USA
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

6486-20

PANEL SAW REPLACMNT MOTOR 15A
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 6486-20 PANEL SAW REPLACMNT MO

$285.27 each




Full Description:
Powerful 15 A Milwaukee replacement motor for the 6480-20 panel saw. Has 20 A commercial-grade paddle switch for durability and long life. Perfect tool for lumber yards, cabinet shops, etc. Bullets: Powerful 15 A (3-1/4 max hp) Milwaukee motor (AC/DC) 20 amp commercial-grade paddle switch for durability and long life For panel saw 6480-20 Includes motor unit, industrial switch and mounting brackets 59461
Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
General purpose motor AC
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Panel Saw Motor
Special Features
Size: 8IN
GTIN-14: 
00045242059461
UPC: 
045242059461
UNSPSC: 
26101112
Height: 
15.0000 IN
Width: 
8.7500 IN
Length: 
9.3800 IN
Gross Weight: 
10.500 L
Country of Origin: 
CHN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov
AIRMASTER FAN COMPANY

I-1820TEM

Commercial / Industrial Motor
Manufacturer: AIRMASTER FAN COMPANY
Short Description: A-M 70013 Commercial / Industrial M

$122.78 each




GREENLEE TEXTRON

HB.9518

MOTOR ASSY
Manufacturer: GREENLEE TEXTRON
Short Description: GRN HB.9518 MOTOR ASSY

$169.07 each




36414-B

BIT,STEP #14 (BULK POP)
Manufacturer: GREENLEE TEXTRON
Short Description: GRN 36414-B BIT,STEP #14 (BULK POP)

$81.65 each




NU 696RNB

Finish Pack. Fan Motor/Grille Assembly. 50 CFM, 4.0 Sones. Uses 690RA housing pack.
Manufacturer: BROAN-NUTONE LLC
Short Description: NUTONE 696RNB Finish Pack. Fan Moto

$12.63 each




Full Description:
Finish Pack. Fan Motor/Grille Assembly. 50 CFM, 4.0 Sones. Uses 690RA housing pack.
Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
General purpose motor AC
Brand Name
Broan
Type
Fan Motor/Grille Assembly
Special Features
50 Cfm 40 Sones Finish Pack
GTIN-14: 
00784891254550
UPC: 
784891254550
UNSPSC: 
26101112
Height: 
0.8333 IN
Width: 
0.7813 IN
Length: 
1.9479 IN
Gross Weight: 
12.600 L
Country of Origin: 
USA
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov
GREENLEE TEXTRON

00462

PLATE,MOTOR MOUTING
Manufacturer: GREENLEE TEXTRON
Short Description: GRN 00462 PLATE,MOTOR MOUTING

$366.55 each




GREENLEE TEXTRON

07922

MOTOR, 230V
Manufacturer: GREENLEE TEXTRON
Short Description: GRN 07922 MOTOR, 230V

$1,125.68 each




4253-1

DRILL 1/2 MAG MOTOR 6.2A
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 4253-1 DRILL 1/2 MAG MOTOR 6.2

$332.57 each




Full Description:
Lightweight with ample power, the ½” Electromagnetic Drill Press Motor is ideal for drilling small holes into steel. At just 8 pounds, this lightweight 6.2-amp motor still provides plenty of power to deliver 600 RPM and produce up to 1650 pounds of drill point pressure with a 1-inch steel plate. This unit features a ½” chuck for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the 4202 fixed position base (sold separately) for best results. Bullets: Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 600 RPM ½” Capacity: Taps up to 5/8-inch, 18-threaded holes. (5/8-11 and ½-13 taps are not recommended.) Maximum force: Develops up to 1650 pounds of drill point pressure with a 1-inch steel plate 13104
Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
General purpose motor AC
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Drill Motor
Special Features
No Load Speed: 600RPM, Current Rating: 6.2AMP, Drill Point Pressure: 1610/1650LB, Drill Capacity: 1/2IN, Light Weight and Ample Power Make this a good Choice for Smaller Holes into Steel, 1/2IN Keyed Chuck, Taps upto 5/8IN-18 Threaded Hole
Application
For Electromagnetic Drill Press
Voltage Rating
120
GTIN-14: 
00045242013104
UPC: 
045242013104
UNSPSC: 
26101112
Height: 
15.6200 IN
Width: 
5.5000 IN
Length: 
5.5600 IN
Gross Weight: 
9.700 L
Country of Origin: 
CHN
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

4262-1

DRILL 3/4 MAG MOTOR 11.5A
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 4262-1 DRILL 3/4 MAG MOTOR 11.

$558.31 each




Full Description:
No job is too large for this heavy-duty drill press motor. Built for production drilling, this 11.5-amp drill motor can handle the toughest drilling jobs with up to a ¾” threaded hole capacity. The unit runs at 350 no-load RPM, geared low for maximum torque. It can produce up to 1670 pounds of drill point pressure with a 1-inch steel plate. A ¾” chuck permits fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the larger 4203 adjustable base (sold separately) for the toughest applications. Bullets: Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 350 RPM Dual-Mount Gear Case/Reverse Mount: Permits tight quarter drilling 3/4” Capacity: Taps up to 1-inch, 14-threaded holes Maximum force: Develops up to 1670 pounds of drill point pressure with a 1-inch steel plate 13159
Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
General purpose motor AC
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Drill Motor
Special Features
Drill Capacity: 3/4IN, Current: 11.5AMP, Load Speed: 350RPM, Tap Capacity: 1IN-14, Drill Point Pressure: 1630/1670LB, Dual Mount Gear Case/Reverse Mount for Tight Quarter Drilling
Application
For Electromagnetic Drill Press
Voltage Rating
120
GTIN-14: 
00045242013159
UPC: 
045242013159
UNSPSC: 
26101112
Height: 
20.1300 IN
Width: 
6.4400 IN
Length: 
4.4400 IN
Gross Weight: 
21.850 L
Country of Origin: 
USA
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov

4292-1

NO 3 MT DRILL 1-1/4 ELECTROMAG MOT 11.5A
Manufacturer: MILWAUKEE ELECTRIC TOOL CORP.
Short Description: MILW 4292-1 NO 3 MT DRILL 1-1/4 ELE

$707.99 each




Full Description:
No job is too large for this heavy-duty drill press motor. Built for production drilling, this 11.5-amp drill motor can handle the toughest drilling jobs with up to a 1-¼” threaded hole capacity. The two-speed unit runs at 375 and 750 RPM, geared low for maximum torque. It can produce up to 1600 pounds of drill point pressure with a 1-inch steel plate. This unit features a No. 3 Morse Taper Chuck, for fast and easy bit changes while eliminating slippage and breakage. The dual-mount gear case with reverse mount permits tight quarter drilling. Use with the larger 4203 adjustable base (sold separately) for the toughest applications. Bullets: Powerful 11.5-amp motor: Engineered for the toughest applications, delivering 2375/750 RPM Dual-Mount Gear Case/Reverse Mount: Permits tight quarter drilling 1-1/4” Capacity: Taps up to 1-inch, 14-threaded holes Maximum force: Develops up to 1600 pounds of drill point pressure with a 1-inch steel plate 13203
Unspsc Family
Power sources
Unspsc Class
Electric alternating current AC motors
Unspsc Commodity
General purpose motor AC
Brand Name
Milwaukee
Sub Brand
MILWAUKEE
Type
Drill Motor
Special Features
Drill Capacity: 1 1/4IN, Current: 11.5AMP, No Load Speed: 750/375RPM, Tap Capacity: 1IN-14, Drill Point Pressure: 1530/1600LB, Develops up to 1600 Pounds of Drill Point Pressure with 1IN Steel Plate
Application
For Electromagnetic Drill Press
Voltage Rating
120
GTIN-14: 
00045242013203
UPC: 
045242013203
UNSPSC: 
26101112
Height: 
20.1900 IN
Width: 
6.5000 IN
Length: 
7.2500 IN
Gross Weight: 
25.000 L
Country of Origin: 
USA
Warranty
View Warranty
Proposition 65
WARNING: This product can expose you to chemicals which is known to the State of California to cause cancer and birth defects or other reproductive harm. Full details here. For more information go to www.P65Warnings.ca.gov
previous | 1 | 2 | 3 | next