$10.14 / EA *
* This is the minimum price that we are able to advertise. Call us at (800) 462-7733 and we will offer a lower price.
Dual Rated Splice Kits 2 Screw Connector 8-2 AWG - This Dual Rated Splice Kit is easy to use.Dual Rated Splice Kits 2 Screw Connector 8-2 AWG features include: AL9CU Dual Rated splice kit eliminates expensive crimping tools when splicing Aluminum or Copper conductors for Direct Burial Splice kit comes complete with one mechanical connector and one piece of heat shrink tubing Popular splicing applications would be for repair and/or extending type USE cable and other electrical cables Seal with h...
Dual Rated Splice Kits 2 Screw Connector 8-2 AWG - This Dual Rated Splice Kit is easy to use.Dual Rated Splice Kits 2 Screw Connector 8-2 AWG features include: AL9CU Dual Rated splice kit eliminates expensive crimping tools when splicing Aluminum or Copper conductors for Direct Burial Splice kit comes complete with one mechanical connector and one piece of heat shrink tubing Popular splicing applications would be for repair and/or extending type USE cable and other electrical cables Seal with heat gun or torch UL Listed Components 600 Volt maximum 221deg;F (105deg;C) rating Order Qty of 1 = 1 Kit Below is more info on our Dual Rated Splice Kits 2 Screw Connector 8-2 AWG
150
- Dual Rated Splice Kits 2 Screw Connector - This Dual Rated Splice Kit is easy to use.
- AL9CU Dual Rated splice kit eliminates expensive crimping tools when splicing Aluminum or Copper conductors for Direct Burial
- Splice kit comes complete with one mechanical connector and one piece of heat shrink tubing
- Popular splicing applications would be for repair and/or extending type USE cable and other electrical cables
- UL Listed Components
- 600 Volt maximum 221°F (105°C) rating
- Dual Rated Splice Kits 2 Screw Connector - This Dual Rated Splice Kit is easy to use.
- AL9CU Dual Rated splice kit eliminates expensive crimping tools when splicing Aluminum or Copper conductors for Direct Burial
- Splice kit comes complete with one mechanical connector and one piece of heat shrink tubing
- Popular splicing applications would be for repair and/or extending type USE cable and other electrical cables
- UL Listed Components
- 600 Volt maximum 221°F (105°C) rating
- UPC
- 601986670029
- UNSPSC
- 39121718
- Country of Origin
- US
- Conductor Range:
- #8-#2
- Connector Type:
- Aluminum Mechanical Dual Rated
- MATERIAL:
- Aluminum
- MAXIMUM VOLTAGE:
- 600 Volts
- Splice Method:
- Heat Shrink
- Splice Type:
- Direct Burial
CPT-3-1/2-3M
$585.21 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 2.90 in Yes |
Connector Maximum Installed Length | 13.50 in Yes |
Connector Maximum Outside Diameter | 6.00 in Yes |
5513A-3/0-CU
$651.20 /ea
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design sized to fit Type MV-90 or Type MV-105 cables with copper, or aluminum conductor sizes ranging from 2 AWG-1000 kcmil (35-500 mm²).
Attributed Data | Included |
---|
CPT-3/4-3M
$326.36 /ea
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an open-ended tubular rubber sleeve which is factory expanded and assembled onto a removable core. The core is removed after the assembly has been positioned for installation over a bulkhead terminator connector. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.). CPT insulating sleeves are made of an EPDM rubber that contains no chlorides or sulfers.
Attributed Data | Included |
---|---|
Cable Minimum Outside Diameter | 0.66 in Yes |
Connector Maximum Installed Length | 4.80 in Yes |
Connector Maximum Outside Diameter | 1.90 in Yes |
Product Image | |||
---|---|---|---|
CPT-3-1/2-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$585.21 / EA
|
5513A-3/0-CU
The 3M™ Cold Shrink QS-III Shielded Cable Splices 5513A, 5514A, 5515A and 5516A Series are 15 kV class inline splices for joining tape shield, wire shield, UniShield® or longitudinally corrugated (LC) shielded power cables. It is a cold shrink design...
$651.20 / EA
|
CPT-3/4-3M
3M™ Cold Shrink Corrosion Protection Kit CPT Series are designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments.A CPT series assembly is an...
$326.36 / EA
|
|
Attributed Data | |||
Cable Minimum Outside Diameter | 0.66 in 0.66 in | 2.90 in 2.90 in | |
Connector Maximum Installed Length | 4.80 in 4.80 in | 13.50 in 13.50 in | |
Connector Maximum Outside Diameter | 1.90 in 1.90 in | 6.00 in 6.00 in | |
Add a product to the cart | Show more details | Show more details | Show more details |