Fire Alarm Station
Item #: XAL-53

Manufacturer: KILLARK ELECTRICAL PRODUCTS

$811.86 each


Lead time over: 7 days
may be longer on small orders



MPN
Xal-53
SKU
XAL-53
Manufacturer
KILLARK ELECTRICAL PRODUCTS
Category
FIRE ALARM EQUIPMENT
Brand Name
Killark
Type
Aluminum fire alarm station with pull-ring activation
Special Features
Enclosure is made of copper free aluminum alloy. Conduit openings are 3/4" NPT feed through. Red, textured powder epoxy paint finish is standard on box and cover and provides high visibility for alarm station. Has (1) normally open and (1) normally closed contacts. Bilingual nameplates included per CSA requirement. Internal ground screw is standard. The alarm station is activated by lifting the front cover and pulling down ring. This quick, easy to use two-step process prevents unintentional operation. Operator is reset by depressing shaft and returning plate to original position.
Application
Hazardous areas due to the presence of flammable gases or vapors, combustible dusts, or easily ignitable fibers or flyings. Installation at petroleum refineries, chemical and petrochemical plants, storage areas, and other processing facilities where hazardous substances are handled or stored. Areas where emergency control of fire alarm or signal circuits is required.
Standard
UL, ULC,CSA
Voltage Rating
600 Vac
Amperage Rating
2.5/10 A
Action
SP
Number Of Poles
1
Contact Configuration
1-NO/1-NC
Contact Rating
7200 VA (make), 720 VA (break), 10A cont. @ 600V AC; 2.5A cont. @ 600V DC.
Actuator
Pull ring
Size
6-27/64" H x 3-7/64" W x 4-9/64"
Enclosure
Aluminum enclosure
Environmental Conditions
Hazardous locations
Long Description
Xal/xas Series Controls Fire Alarm Stations
Stock Status
This item is listed as MANUFACTURER NON-STOCK.
GTIN-14
00783936880389
UNSPSC
39122216

Email us a question about this item